{"title":"Woodturning","description":null,"products":[{"product_id":"rikon-turning-system-with-carbide-inserts-4-piece","title":"RIKON Turning System with Carbide Inserts - 4 Piece","description":"\u003cp\u003eThe RiIKON 70-800 Turning System features tungsten carbide cutters that maintain their cutting edges longer than typical carbon or high-speed steel tools. When after hours of use an insert does become dull, you can simply rotate it to work with a new edge of the cutter. The 16\" long, machined aluminum handle incorporates an anti-vibration grip that utilizes a unique forward chucking system. The finely machined shafts have bottoms milled with a flat and 2 side bevels for extra stability on the tool rest when turning. The bottom flat is in line with the cutter to maintain a flat position for scrape cutting providing the support and control needed, especially when turning bowl interiors where the cutter is extended out far from the tool rest. The two-sided bevel surfaces provide extra support when the cutter is shifted to an angled skew position for shear cutting action. Changing between shafts is quick and simple requiring no tools. Simply unscrew the knurled chuck collet to insert any of the three supplied steel tool shafts, tighten the chuck collar, and you are ready to turn! Each tool shaft is supplied with one of three carbide insert cutter profiles: a circle, square or diamond.\u003cbr\u003e\u003cstrong\u003eTurning Applications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircle Cutter \u003c\/strong\u003e– Very effective for finishing cuts on bowl interiors or any cove or contoured design on spindles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Cutter\u003c\/strong\u003e – Straight edges on this carbide cutter make it extremely useful for shaping convex or straight surfaces. Ideal for producing tenons for furniture construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Cutter\u003c\/strong\u003e – Mainly used to add thin line details on turnings, the spear-point tip is great for undercutting and making small beads on projects. The long sides of the triangular shape are also useful for fine shaping of rims on bowls or plates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDeveloped for the experienced or novice woodturner\u003c\/li\u003e\n\u003cli\u003eTungsten carbide cutters that maintain their cutting edges longer than typical carbon or high-speed steel tools\u003c\/li\u003e\n\u003cli\u003eMachined aluminum handle is hollow, with a removable end cap for adding additional weight if desired\u003c\/li\u003e\n\u003cli\u003eHandle incorporates an anti-vibration grip that utilizes a unique forward chucking system\u003c\/li\u003e\n\u003cli\u003eEach tool shaft is supplied with one of three carbide insert cutter profiles: a circle, square or diamond\u003c\/li\u003e\n\u003cli\u003eNo tools are required when changing between shafts\u003c\/li\u003e\n\u003cli\u003eTurning system may be used for a variety of turning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOverall Length: 24-3\/8\"\u003c\/li\u003e\n\u003cli\u003eHandle Length: 16\" \u003c\/li\u003e\n\u003cli\u003eHandle Diameter: 1.4\"\u003c\/li\u003e\n\u003cli\u003eHandle Weight: 1 lb. 12.3 ounces\u003c\/li\u003e\n\u003cli\u003eHandle Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eShaft Size: 8.4\" x .83\" W\u003c\/li\u003e\n\u003cli\u003eShaft Weight: 1 lb. 1.8 ounces\u003c\/li\u003e\n\u003cli\u003eCutter Material: Tungsten carbide\u003c\/li\u003e\n\u003cli\u003eCutter Shapes: Square, Round and Diamond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 16\" Handle\u003c\/li\u003e\n\u003cli\u003e(3) Shafts\u003c\/li\u003e\n\u003cli\u003e(3) Carbide Cutters (Circle, Square \u0026amp; Diamond)\u003c\/li\u003e\n\u003cli\u003e(1) Mounting screws\u003c\/li\u003e\n\u003cli\u003e(1) T20 (Star) Wrench\u003c\/li\u003e\n\u003cli\u003e(1) Product Manual\u003c\/li\u003e\n\u003cli\u003e(1) Foam-lined Storage Box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668907942251,"sku":"870031","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/870031_000_001.jpg?v=1785958574"},{"product_id":"rikon-tungsten-carbide-replacement-cutter","title":"RIKON Tungsten Carbide Replacement Cutter","description":"\u003cdiv\u003eThe Rikon® 70-800 Turning Tool System (#870031, sold separately) is perfect for experienced and novice woodturners. It features a machined aluminum handle, three steel shafts, and tungsten carbide cutters that, when dull, can be rotated or replaced in seconds! \u003cbr\u003e\u003cbr\u003eThe Rikon® 70-812 Diamond Carbide Insert Cutter is mainly used to add thin line details on turnings. The spear-point tip is excellent for undercutting and creating small beads. The long sides of the cutter are also useful for the fine shaping of rims on bowls or plates. Mounts direct to the shaft with a set screw. Mix and match insert cutters to customize this turning system to meet your woodworking needs.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eUsed for adding thin line details on turnings and the fine shaping of rims on bowls or plates\u003c\/li\u003e\n\u003cli\u003eSpear-point tip is excellent for undercutting and creating small beads\u003c\/li\u003e\n\u003cli\u003eCutting edges maintain their sharpness longer than typical carbon or high-speed steel tools\u003c\/li\u003e\n\u003cli\u003eCan be resharpened\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: Replacement carbide insert cutter\u003c\/li\u003e\n\u003cli\u003eMaterial: Tungsten carbide\u003c\/li\u003e\n\u003cli\u003eShape: Diamond\u003c\/li\u003e\n\u003cli\u003eCompatibility: For use with Rikon 70-800 Woodturning System\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) Diamond Carbide Insert Cutter\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003eUse carefully, as excessive pressure on the tip from hitting knots, irregular wood grain, or aggressive use could damage the cutter. \u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"2\" Square Radius \/ Negative Rake","offer_id":53668908401003,"sku":"174181","price":17.99,"currency_code":"USD","in_stock":true},{"title":"Diamond \/ Negative Rake","offer_id":53668908433771,"sku":"174180","price":15.29,"currency_code":"USD","in_stock":true},{"title":"Diamond \/ Positive Rake","offer_id":53668908466539,"sku":"163484","price":12.59,"currency_code":"USD","in_stock":true},{"title":"Round \/ Negative Rake","offer_id":53668908499307,"sku":"174178","price":15.29,"currency_code":"USD","in_stock":true},{"title":"Round \/ Positive Rake","offer_id":53668908532075,"sku":"163482","price":12.59,"currency_code":"USD","in_stock":true},{"title":"Square \/ Negative Rake","offer_id":53668908564843,"sku":"174179","price":15.29,"currency_code":"USD","in_stock":true},{"title":"Square \/ Positive Rake","offer_id":53668908597611,"sku":"163483","price":12.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/174181_000_001.jpg?v=1785958582"},{"product_id":"rikon-bed-extension-for-70-150vsr-lathe-13-1-2-in","title":"RIKON Bed Extension for 70-150VSR Lathe - 13-1\/2 in","description":"\u003cp\u003eThe Rikon® 13-1\/2\" Bed Extension is the perfect accessory for Rikon® Lathes. Designed for use with Models 70-150VSR, 70-220VSR, \u0026amp; 70-1420VSR.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMade of heavy cast iron\u003c\/li\u003e\n\u003cli\u003eMachined bed matches the 70-150VSR lathe for easy sliding of the tailstock for long spindles\u003c\/li\u003e\n\u003cli\u003eBoth ends of the bed extension ends are machined for adding even more extensions to your lathe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtension length: 13 ½″\u003c\/li\u003e\n\u003cli\u003eConstruction: Heavy cast iron\u003c\/li\u003e\n\u003cli\u003eMachined bed surfaces to match the 70-150VSR lathe for smooth tailstock sliding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Rikon® 13-1\/2\" Bed Extension for 70-150VSR Lathe\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668908892523,"sku":"172640","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/172640_000_001.jpg?v=1785958590"},{"product_id":"rikon-detailing-3-16r-carbide-insert-cutter-for-70-800-turning-system","title":"RIKON Detailing 3\/16R Carbide Insert Cutter for 70-800 Turning System","description":"\u003cp\u003eThe RIKON 70-800 Turning Tool System (#870031, sold separately) is perfect for experienced and novice woodturners. It features a machined aluminum handle, three steel shafts, and tungsten carbide cutters that, when dull, can be rotated or replaced in seconds! \u003cbr\u003eThe RIKON 70-813 Detailing 3\/16R Carbide Insert Cutter is great for adding cove details to your turnings. The double-ended cutter's side shapes allow for wide 'V' cuts. Mounts direct to the shaft with a set screw. Mix and match insert cutters to customize this turning system to meet your woodworking needs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eGreat for adding cove details into turnings\u003c\/li\u003e\n\u003cli\u003eSide shapes allow for making wide 'V' cuts\u003c\/li\u003e\n\u003cli\u003eCutting edges maintain their sharpness longer than typical carbon or high-speed steel tools\u003c\/li\u003e\n\u003cli\u003eCan be sharpened for years of use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Type: Replacement carbide insert cutter\u003c\/li\u003e\n\u003cli\u003eMaterial: Tungsten carbide\u003c\/li\u003e\n\u003cli\u003eShape: Detailing 3\/16R\u003c\/li\u003e\n\u003cli\u003eCompatibility: For use with Rikon 70-800 Woodturning System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) RIKON Detailing 3\/16R Carbide Insert Cutter for 70-800 Turning System\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668909285739,"sku":"872259","price":17.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/872259_000_001.jpg?v=1785958598"},{"product_id":"rikon-z3-4-jaw-lathe-chuck-direct-thread-1-in-x-8-tpi","title":"RIKON Z3 4-Jaw Lathe Chuck - Direct Thread - 1 in x 8 TPI","description":"\u003cdiv\u003eRIKON’s Z3 4-Jaw Chuck Kit 71-103 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This self-centering chuck is CNC precision-made from high tensile steel and features a geared jaw system for easy operation and excellent project-holding power. The redesigned chuck sliders provide added strength for securely attaching a variety of compatible jaw set accessories. Meticulously machined, the chuck body and internal gearing ensure smooth and reliable opening and closing with the included special chuck key.\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eFor lathes with a 10″ to 14″ swing\u003c\/li\u003e\n\u003cli\u003eDirect threaded 1″ x 8 TPI body for immediate mounting on lathe\u003c\/li\u003e\n\u003cli\u003e3-1\/2″ (88 mm) in diameter with pre-machined 1″ x 8 TPI body\u003c\/li\u003e\n\u003cli\u003eApproximately 2.6 lb\u003c\/li\u003e\n\u003cli\u003eExtra-fine finish with etched safety icons and serial number\u003c\/li\u003e\n\u003cli\u003e10 year warranty\u003c\/li\u003e\n\u003cli\u003e50 mm (2\") jaw set accessory great for holding bowl or spindle\/tenon projects\u003c\/li\u003e\n\u003cli\u003eJaw sets in additional sizes and shapes available\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e(1) Z3 4-Jaw Chuck\u003c\/li\u003e\n\u003cli\u003e(1) 50 mm (2\") Jaw Set\u003c\/li\u003e\n\u003cli\u003e(1) Wood Screw RH\u003c\/li\u003e\n\u003cli\u003e(1) Chuck Key\u003c\/li\u003e\n\u003cli\u003e(1) T-handle T20 Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 3 mm Hex Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668912333163,"sku":"191233","price":134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191233_000_001.jpg?v=1785958621"},{"product_id":"rikon-z4-4-jaw-lathe-chuck-direct-thread-1-1-4-in-x-8-tpi","title":"RIKON Z4 4-Jaw Lathe Chuck - Direct Thread - 1-1\/4 in x 8 TPI","description":"\u003cdiv\u003eRIKON’s Z4 4-Jaw Chuck Kit 71-104 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This self-centering chuck is CNC precision-made from high tensile steel and features a geared jaw system for easy operation and excellent project-holding power. The redesigned chuck sliders provide added strength for securely attaching a variety of compatible jaw set accessories. Meticulously machined, the chuck body and internal gearing ensure smooth and reliable opening and closing with the included special chuck key.\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBest for use on larger lathes that turn heavier wood\u003c\/li\u003e\n\u003cli\u003eDirect threaded 1-1\/4″ x 8TPI body for immediate mounting on lathes. For use on larger lathes with swings 14″ and above.\u003c\/li\u003e\n\u003cli\u003eExtra-fine finish with etched safety icons and serial number\u003c\/li\u003e\n\u003cli\u003e10 year warranty\u003c\/li\u003e\n\u003cli\u003eIncludes a 50 mm (2″) jaw set accessory -- one of the most popular standard jaw styles for holding bowl or spindle\/tenon projects\u003c\/li\u003e\n\u003cli\u003eJaw sets in additional sizes and shapes available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3-7\/8″ (98.5 mm) in diameter with pre-machined 1-1\/4″ x 8 TPI body.\u003c\/li\u003e\n\u003cli\u003eApproximately 3.8 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Z4 4-Jaw Chuck\u003c\/li\u003e\n\u003cli\u003e(1) 50 mm (2\") Jaw Set\u003c\/li\u003e\n\u003cli\u003e(1) Wood Screw RH\u003c\/li\u003e\n\u003cli\u003e(1) Chuck Key\u003c\/li\u003e\n\u003cli\u003e(1) T-handle T20 Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 3 mm Hex Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668913840491,"sku":"191234","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191234_000_001.jpg?v=1785958637"},{"product_id":"rikon-extension-handle-6-in-for-70-800-turning-system","title":"RIKON Extension Handle - 6 in for 70-800 Turning System","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eExpand your turning reach and comfort with the RIKON 6″ Extension Handle, designed exclusively for the RIKON 70-800 Turning System. This precision-machined handle adds length and control for deeper or larger turning projects, allowing you to work safely and confidently with longer tools.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eConstructed from durable, lightweight aluminum, the handle features a secure threaded connection for easy attachment to the standard RIKON Turning System handle. The textured grip provides comfort and stability during extended use, reducing hand fatigue while improving tool control.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eScrews securely into the rear of the 70-801 \u003c\/li\u003e\n\u003cli\u003eAluminum extension enhances leverage and reach when turning\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: Extension handle\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum\u003c\/li\u003e\n\u003cli\u003eCompatibility: For use with 70-800 RIKON Woodturning System\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON 6\" Extension Handle for 70-800 Turning System\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe RIKON 70-800 Turning Tool System (#870031, sold separately) is perfect for experienced and novice woodturners. It features a machined aluminum handle, three steel shafts, and tungsten carbide cutters that, when dull, can be rotated or replaced in seconds! \u003c\/li\u003e\n\u003cli\u003eThe RIKON 70-802 6\" Extension Handle attaches to the end of the 70-801  handle extending your reach and providing extra leverage for easy turning and great results.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668914430315,"sku":"427115","price":38.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/427115_000_001.jpg?v=1785958645"},{"product_id":"rikon-6-in-faceplate-1-x-8-tpi","title":"RIKON 6 in Faceplate - 1 x 8 TPI","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eExperience the ultimate precision and reliability with the RIKON 6\" Faceplate - 1 x 8 TPI. Engineered with precision and durability in mind, this faceplate is designed to securely hold your workpieces, ensuring stability and accuracy throughout your turning projects. Its solid construction ensures reliable performance, allowing you to tackle both small and large-scale projects with confidence. Featuring a 1 x 8 TPI thread, this face plate offers compatibility with a wide range of lathes, making it a versatile choice for woodworkers of all levels.\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDepth: 1\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 6\"\u003c\/li\u003e\n\u003cli\u003eThread Size: 8 TPI\u003c\/li\u003e\n\u003cli\u003eMaterial: Cast iron\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) RIKON 6\" Faceplate - 1 x 8 TPI\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668914856299,"sku":"832639","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/832639_000_001.jpg?v=1785958653"},{"product_id":"rikon-counterweight-for-70-800-turning-system","title":"RIKON Counterweight for 70-800 Turning System","description":"\u003cdiv\u003eThe RIKON 70-800 Turning Tool System (#870031, sold separately) is perfect for experienced and novice woodturners. It features a machined aluminum handle, three steel shafts, and tungsten carbide cutters that, when dull, can be rotated or replaced in seconds! \u003cbr\u003eThe RIKON 70-803 Counterweight attaches to the end of the 70-801 handle for extra counterbalance against jarring, helping to keep your tools balanced for comfortable turning and great results.\u003cbr\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEnsures the Rikon turning system remains balanced in your hands\u003c\/li\u003e\n\u003cli\u003eProtects against jarring\u003c\/li\u003e\n\u003cli\u003eGreat for support\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: Counterweight for turning system\u003c\/li\u003e\n\u003cli\u003eCompatibility: For use with 70-800 Rikon Woodturning System\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) Rikon® Counterweight for 70-800 Turning System\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668914823531,"sku":"427116","price":15.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/427116_000_001.jpg?v=1785958653"},{"product_id":"rikon-t20-m6x10-replacement-jaw-screw-set-8-piece","title":"RIKON T20 - M6x10 Replacement Jaw Screw Set - 8 Piece","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eSafely and securely finish your turning projects with the RIKON Model 71-315 Cole Jaw Chuck Accessory – 305 mm (12\"). Designed for use with RIKON 4-jaw chucks, this accessory provides a reliable, non-marring grip for reverse chucking bowls, platters, and other round workpieces.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe large 12\" diameter and adjustable rubber-coated grips allow for a customizable fit, accommodating a wide range of sizes while protecting delicate surfaces. Constructed from precision-machined aluminum, these jaws maintain balance and accuracy even at high speeds, ensuring smooth, vibration-free performance.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement screws for securing RIKON chuck jaws\u003c\/li\u003e\n\u003cli\u003eM6x10 thread size fits compatible RIKON 4-jaw chucks and accessory jaw sets\u003c\/li\u003e\n\u003cli\u003eSet of 8 screws provides enough replacements for a full jaw set\u003c\/li\u003e\n\u003cli\u003eDurable steel construction ensures long-lasting strength and reliability\u003c\/li\u003e\n\u003cli\u003ePrecision-machined threads for smooth, secure installation and removal\u003c\/li\u003e\n\u003cli\u003eT20 Torx head design prevents stripping and allows firm, even tightening\u003c\/li\u003e\n\u003cli\u003eIdeal for maintenance or replacement of worn or lost jaw screws\u003c\/li\u003e\n\u003cli\u003eFactory-original RIKON hardware ensures perfect fit and compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) Star Screw T20 M6x10 Package of 8\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668915413355,"sku":"191268","price":11.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191268_000_001.jpg?v=1785958661"},{"product_id":"rikon-tool-rest-extension-knuckle","title":"RIKON Tool Rest Extension Knuckle","description":"\u003cdiv\u003eExtend your turning capabilities and reach those hard-to-access spots with the Rikon® 70-960 Tool Rest Extension Knuckle. Designed to mount on your lathe’s tool rest post, it provides an extra 7½″ of cantilever reach while maintaining a 1″ post and receiving hole for standard compatibility.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7½″ reach extension \u003c\/li\u003e\n\u003cli\u003e1″ post and 1″ receiving hole fits standard 1″ tool rest posts for easy installation\u003c\/li\u003e\n\u003cli\u003eDesigned for use with RIKON lathes, including model 70-3040\u003c\/li\u003e\n\u003cli\u003eDurable metal construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAssembled Weigh: 5lbs\u003c\/li\u003e\n\u003cli\u003eModel Compatibility: 70-3040\u003c\/li\u003e\n\u003cli\u003eAttachment Method: Base Mounting Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhats Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Rikon Tool Rest Extension Knuckle\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668915347819,"sku":"172645","price":49.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/172645_000_001.jpg?v=1785958661"},{"product_id":"rikon-side-handle-for-70-800-turning-system","title":"RIKON Side Handle for 70-800 Turning System","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eTake greater control of your turning tools with the RIKON Side Handle, designed specifically for the RIKON 70-800 Turning System. This well-balanced handle adds a second point of contact for enhanced stability and smoother tool movement, giving you precision and confidence at every pass.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eBuilt from strong, lightweight aluminum, the side handle installs easily and securely onto your existing 70-800 system. Its comfortable, textured grip helps reduce fatigue while maintaining a firm hold—even during long or demanding turning sessions.\u003c\/p\u003e\n\u003cbr\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAdditional control when working dense or figured woods\u003c\/li\u003e\n\u003cli\u003eScrews direct into the 70-801 16\" Handle\u003c\/li\u003e\n\u003cli\u003eGreat for support\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: Side handle for turning system\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eCompatibility: For use with 70-800 Rikon Woodturning System\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) Rikon® 70-804 Side Handle\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe RIKON 70-800 Turning Tool System (#870031, sold separately) is perfect for experienced and novice woodturners. It features a machined aluminum handle, three steel shafts, and tungsten carbide cutters that, when dull, can be rotated or replaced in seconds! \u003cbr\u003eThe RIKON 70-804 Side Handle attaches to the front of the 70-801 handle for extra hand control when working with dense or figured woods.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668915741035,"sku":"427117","price":19.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/427117_000_001.jpg?v=1785958669"},{"product_id":"rikon-midi-lathe-bed-extension-for-70-220vsr-midi-lathe","title":"RIKON Midi Lathe Bed Extension for 70-220VSR Midi Lathe","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eExpand your turning capabilities with the RIKON Midi Lathe Bed Extension, designed exclusively for the RIKON 70-220VSR Midi Lathe.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThis heavy-duty cast-iron extension increases your lathe’s bed length, allowing you to turn longer spindles, table legs, or other extended projects with the same stability and precision as the original bed.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe precision-machined mounting surfaces ensure perfect alignment and vibration-free performance, while the durable cast-iron construction provides the strength and rigidity needed for smooth, consistent turning. Easy to install, the bed extension seamlessly integrates with your existing lathe, maintaining full compatibility with RIKON accessories and stands.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFor use with 70-220VSR\u003c\/li\u003e\n\u003cli\u003eMade of heavy cast iron\u003c\/li\u003e\n\u003cli\u003eMachined bed matches the 70-220VSR lathe for easy sliding of the tailstock for long spindles\u003c\/li\u003e\n\u003cli\u003eBoth ends of the bed extension ends are machined for adding even more extensions to your lathe\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON Midi Lathe Bed Extension for 70-220VSR Midi Lathe\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668915773803,"sku":"862699","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/862699_000_001.jpg?v=1785958669"},{"product_id":"rikon-4-jaw-chuck-insert-1-in-x-8-tpi","title":"RIKON 4-Jaw Chuck Insert - 1 in x 8 TPI","description":"\u003cdiv\u003eThis threaded Chuck Insert converts RIKON's 4-Jaw Chucks that require inserts to fit onto lathes with 1\" x 8 TPI threaded spindles. The Insert's internal threads are precision machined to 1\"x 8 TPI UNC RH specifications for perfect chuck lathe mounting and running-true use. Its external threads install into the back of RIKON insert-type chuck bodies only.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFits on lathes with 1\" x 8 TPI spindles\u003c\/li\u003e\n\u003cli\u003ePrecision machined to 1\"x 8 TPI UNC RH specifications\u003c\/li\u003e\n\u003cli\u003eExternal threads install into the back of RIKON insert-type chuck bodies only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) Chuck Insert 1″ x 8 TPI UNC RH\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668917084523,"sku":"191238","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191238_000_001.jpg?v=1785958677"},{"product_id":"rikon-lathe-tool-rest-5-8-in-diameter","title":"RIKON Lathe Tool Rest - 5\/8 in Diameter","description":"\u003cdiv\u003eRIKON 4\" Tool Rest with a 5\/8\" Diameter Post\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"4\"","offer_id":53668917150059,"sku":"832640","price":22.49,"currency_code":"USD","in_stock":true},{"title":"6\"","offer_id":53668917182827,"sku":"832641","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/832640_000_001.jpg?v=1785958677"},{"product_id":"rikon-mini-lathe-extension-bed-for-70-100-blue-24-in","title":"RIKON Mini Lathe Extension Bed for 70-100 Blue - 24 in","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eExpand the capabilities of your RIKON 70-100 Mini Lathe with this 24″ Extension Bed. Designed for easy installation, this heavy-duty steel extension increases your lathe’s turning capacity, allowing you to work on longer spindles and larger projects with ease.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe precision-machined surface ensures perfect alignment with your existing lathe bed for smooth, vibration-free performance. Finished in RIKON’s signature blue, this extension bed not only enhances functionality but also matches your lathe’s professional look.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eWhether you’re turning table legs, tool handles, or decorative spindle work, this Rikon extension bed provides the stability and durability you need for accurate results every time.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAdds 24″ of turning capacity to the RIKON 70-100 Mini Lathe\u003c\/li\u003e\n\u003cli\u003eHeavy-duty construction\u003c\/li\u003e\n\u003cli\u003ePrecision-machined\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 24″\u003c\/li\u003e\n\u003cli\u003eCompatibility: Rikon 70-100 Mini Lathe\u003c\/li\u003e\n\u003cli\u003eColor: Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON 24″ Mini Lathe Extension Bed for 70-100 Blue\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668918231403,"sku":"160845","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/160845_000_001.jpg?v=1785958684"},{"product_id":"rikon-cole-jaw-chuck-accessory-254-mm-10-in","title":"RIKON Cole Jaw Chuck Accessory - 254 mm (10 in)","description":"\u003cdiv\u003eConstructed of 3\/8\" thick cast aluminum, these versatile Cole Jaws have a diameter of 10\" and have the same basic configuration of RIKON’s smaller 25 mm and 50 mm units. They can expand into a 95 mm to 117 mm (3-3\/4\" - 4-5\/8\") dovetailed recess, or clamp the outside of a turned dovetailed foot that is 84 mm to 104 mm (3-5\/16\" - 4-1\/8\") in diameter. You can finish the bottom of a bowl that’s up 10\" in diameter by inserting the eight rubber stoppers into any of the eight diameter positions on the face of the collet plates. For larger bowls, the stoppers can grip the inside as the chuck expands outward.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eConstructed of durable 3\/8\" cast aluminum\u003c\/li\u003e\n\u003cli\u003eCan expand into a 95 mm to 117 mm (3-3\/4\" to 4-5\/8\") dovetailed recess\u003c\/li\u003e\n\u003cli\u003eCan clamp the outside of a turned dovetailed foot that is 84 mm to 104 mm (3-5\/16\" - 4-1\/8\") in diameter\u003c\/li\u003e\n\u003cli\u003eStoppers can effectively grip either the inside or outside of a bowl\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecificaions:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSize:  Diameter of 10\"\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e(1) RIKON Cole Jaw Chuck Accessory - 254 mm (10\")\u003c\/li\u003e\n\u003cli\u003e(8) Rubber Stoppers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668918821227,"sku":"191259","price":67.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191259_000_001.jpg?v=1785958693"},{"product_id":"rikon-carbide-bead-cutter-3-8-in","title":"RIKON Carbide Bead Cutter - 3\/8 in","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eCreate bold, decorative details with precision using the RIKON 3\/8″ Carbide Bead Cutter. Designed for use with RIKON’s carbide insert turning tools, this cutter produces smooth, consistent 3\/8″ bead profiles ideal for spindles, bowls, and furniture accents.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe solid carbide construction ensures superior edge retention and durability, staying sharp far longer than standard high-speed steel cutters. Its negative rake top bevel minimizes grabbing and chatter, resulting in cleaner cuts and smoother finishes with less sanding required.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003ch3\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/h3\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePrecision 3\/8″ bead profile for bold, consistent decorative accents\u003c\/li\u003e\n\u003cli\u003eSolid carbide cutter\u003c\/li\u003e\n\u003cli\u003eNegative rake top bevel reduces tear-out\u003c\/li\u003e\n\u003cli\u003eCompatible with RIKON carbide turning tools\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\nModel Number: 70-826.\u003c\/li\u003e\n\u003cli\u003eBead Size\/Profile: 3\/8″ bead diameter for decorative turning.\u003c\/li\u003e\n\u003cli\u003eTop Bevel Style: Negative-rake top bevel to reduce cutter grab.\u003c\/li\u003e\n\u003cli\u003eIncluded Hardware: M4 × 9 mm T20 mounting screw.\u003c\/li\u003e\n\u003cli\u003eMaterial: Solid carbide cutter insert.\u003c\/li\u003e\n\u003cli\u003eWeight (approximate): 0.25 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003eM4 x 9mm T20 Mounting Screw\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668919542123,"sku":"192714","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192714_000_001.jpg?v=1785958701"},{"product_id":"rikon-dovetail-deep-gripper-jaw-set-100-mm-4-in","title":"RIKON Dovetail Deep Gripper Jaw Set - 100 mm (4 in)","description":"\u003cdiv\u003eThe 100 mm Dovetail Jaw set is precision machined from a high-quality solid steel billet and comes with an easy-to-read instruction manual. Its expanding dovetail jaws can securely hold bowls up to 14\" in diameter, while the contracting jaws grip spigots and bowl feet up to 3-1\/2\". It’s also perfect for holding square billets ranging from 2-9\/16\" to 3-1\/8\".\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePrecision machined from solid steel billet\u003c\/li\u003e\n\u003cli\u003eExpanding dovetail jaws hold bowls up to 14\" in diameter\u003c\/li\u003e\n\u003cli\u003eContracting jaw grip spigots and bowl feet up to 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003eCan hold square billets ranging from 2-9\/16\" to 3-1\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON Dovetail Deep Gripper Chuck Accessory Jaw Set - 100 mm\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668919509355,"sku":"191255","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191255_000_001.jpg?v=1785958700"},{"product_id":"rikon-large-j-tool-rest-with-1-in-post","title":"RIKON Large J Tool Rest with 1 in Post","description":"\u003cdiv\u003eThe RIKON 12-3\/4\" Long Large J-Curve Tool Rest is the standard rest used by turners for hollowing inside surfaces of larger bowls. The reach and end curve of the rest gives excellent support of tools surfacing these interiors.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eJ-Curve at the end of the rest has a radius of 2-5\/16\" (59mm)\u003c\/li\u003e\n\u003cli\u003eThe straight portion of the rest is about 10-1\/4\" (260mm) long, which is great for use in supporting tools when working on the outside of bowls\u003c\/li\u003e\n\u003cli\u003e8mm diameter top rod is hardened steel to give smooth movement of tools over the rest when turning\u003c\/li\u003e\n\u003cli\u003eCast iron body includes a 1\" diameter tool rest post 5-1\/8\" (130mm) long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Large J Tool Rest with 1\" Post\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668919574891,"sku":"192718","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192718_000_001.jpg?v=1785958701"},{"product_id":"rikon-pen-chuck-accessory-jaw-set","title":"RIKON Pen Chuck Accessory Jaw Set","description":"\u003cdiv\u003eEasily convert your chuck into a fast, accurate pen drilling machine with RIKON'S Pen Jaws. The big jaw design and “V” groove provide a vibration-free, solid grip for all pen blank sizes, ensuring an accurate, centered hole every time.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003eNot only are the jaws perfect for squaring up the ends of the pen blanks, but the solid heavy design means they are powerful enough to handle larger and longer spigot work. With over 1-1\/2\" of rock-solid grip available, larger squares or rounds can be easily turned.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBig jaw design and “V” grove provide a vibration-free grip on pen blanks\u003c\/li\u003e\n\u003cli\u003ePerfect for squaring up ends of pen blanks\u003c\/li\u003e\n\u003cli\u003eCan handle larger and longer spigot work\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" grip can handle larger squares and rounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON Pen Chuck Accessory Jaw Set\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668919771499,"sku":"191257","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191257_000_001.jpg?v=1785958709"},{"product_id":"rikon-4-jaw-chuck-insert-1-1-4-in-x-8-tpi","title":"RIKON 4-Jaw Chuck Insert - 1-1\/4 in x 8 TPI","description":"\u003cdiv\u003eThis threaded Insert converts RIKON's 4-Jaw Chucks that require inserts to fit onto lathes with 1-1\/4\" x 8 TPI threaded spindles. The Insert's internal threads are precision machined to 1-1\/4\"x 8 TPI UNS RH specifications for perfect chuck lathe mounting and running-true use. Its external threads install into the back of RIKON insert-type chuck bodies only.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFits on lathes with 1-1\/4\" x 8 TPI spindles\u003c\/li\u003e\n\u003cli\u003ePrecision machined to 1-1\/4\"x 8 TPI UNC RH specifications\u003c\/li\u003e\n\u003cli\u003eExternal threads install into the back of RIKON insert-type chuck bodies only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) Chuck Insert 1-1\/4″ x 8 TPI UNS RH\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668919837035,"sku":"191239","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191239_000_001.jpg?v=1785958709"},{"product_id":"rikon-carbide-bead-cutter-1-4-in","title":"RIKON Carbide Bead Cutter - 1\/4 in","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eEnhance your turning projects with precision and control using the RIKON 1\/4″ Carbide Bead Cutter.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eDesigned for use with RIKON’s carbide insert turning tools, this cutter produces smooth, consistent 1\/4″ decorative beads with minimal sanding or tear-out.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eCrafted from solid carbide, the cutter offers exceptional edge retention and durability—lasting far longer than high-speed steel alternatives. The negative rake top bevel reduces grab, chatter, and vibration, ensuring a cleaner cut and smoother surface finish on spindles, bowls, pens, and furniture details.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePrecision 1\/4″ bead profile: perfect for creating smooth, consistent decorative beads on turned projects. \u003c\/li\u003e\n\u003cli\u003eSolid carbide construction: offers superior edge retention and durability compared to standard high-speed steel tools. \u003c\/li\u003e\n\u003cli\u003eNegative-rake top bevel: reduces tool “grab” and ensures a much cleaner finish with less chatter and tear-out. \u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware: Comes with an M4 × 9 mm T20 mounting screw for easy installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModel Number: 70-825\u003c\/li\u003e\n\u003cli\u003eBead Size: 1\/4″ (0.25″) nominal diameter profile\u003c\/li\u003e\n\u003cli\u003eTop Bevel Style: Negative rake for cleaner finish\u003c\/li\u003e\n\u003cli\u003eMaterial: Solid carbide cutter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003eM4 x 9mm T20 Mounting Screw\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668919902571,"sku":"192713","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192713_000_001.jpg?v=1785958710"},{"product_id":"rikon-dovetail-jaw-set-71-209-130-mm-5-in","title":"RIKON Dovetail Jaw Set 71-209 - 130 mm (5 in)","description":"\u003cdiv\u003eThe 130 mm Dovetail Jaws are for holding large bowls and platters. Jaws are primarily intended for work over 16\" in diameter up to a maximum of 29-1\/2\". Designed to grip spigots from 4.2\" to 5\" and expand into dovetailed recesses from 4.88\" to 5.86\".\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eIntended for work with diameters from 16\" to 29-1\/2\"\u003c\/li\u003e\n\u003cli\u003eDesigned to grip spigots from 4.2\" to 5\"\u003c\/li\u003e\n\u003cli\u003eExpands into dovetailed recesses from 4.88\" to 5.86\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eSize: 130 mm (5\")\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) 130 mm (5\") Dovetail Jaws\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668920197483,"sku":"191250","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191250_000_001.jpg?v=1785958717"},{"product_id":"rikon-spigot-chuck-accessory-jaws-set-35-mm-1-22-in","title":"RIKON Spigot Chuck Accessory Jaws Set - 35 mm (1.22 in)","description":"\u003cdiv\u003eEach set of 35 mm Spigot Jaws is precision machined from a high-quality solid steel billet and comes with an easy-to-read instruction manual. Its heavy section jaws have a powerful grip for spigot (tenon) turning. With 30 mm (1-1\/8\") depth and a special serrated tooth form, these jaws securely hold your workpiece. Ideal for work that requires a long overhang or when hollowing into end grain.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSuperior gripping power\u003c\/li\u003e\n\u003cli\u003ePrecision machined from solid steel billet\u003c\/li\u003e\n\u003cli\u003eIncludes easy-to-read instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) 35 mm (1.22”) Spigot Jaws\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668920164715,"sku":"191244","price":58.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191244_000_001.jpg?v=1785958717"},{"product_id":"rikon-badger-spur-center-mt2","title":"RIKON Badger Spur Center - MT2","description":"\u003cp\u003eThe Rikon® Badger Spur Center - MT2 features a unique spring-loaded guard which prevents loose clothing, hair, jewelry, etc., from becoming entangled with the spurs. It also prevents you from accidentally touching the spurs with your tools or rest while in operation.\u003cbr\u003e\u003cbr\u003eThe spring-loaded center point is engineered to allow over 3\/8” (10 mm) of travel. This allows for easy loading, unloading. Spindle and bowl turners will appreciate the comfort and convenience of knowing that the guard will make turning safer whether you are a beginning turner or an expert.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAccurate Concentric Center Point for precise concentricity without fuss, and without fail, every time\u003c\/li\u003e\n\u003cli\u003eWill accommodate a wide range of work piece diameters – down to 1\/2” (13 mm)\u003c\/li\u003e\n\u003cli\u003eSpring Loaded Center Point moves over 3\/8″ of travel, allowing easy lathe mounting, stopping and removal of the work piece\u003c\/li\u003e\n\u003cli\u003eDesigned with a large surface area in the axial plane parallel to the grain of the wood, and sharp to readily penetrate the end grain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Rikon® Badger Spur Center - MT2\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668920230251,"sku":"861207","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/861207_000_001.jpg?v=1785958717"},{"product_id":"rikon-lathe-bed-extension-16-in","title":"RIKON Lathe Bed Extension - 16 in","description":"\u003cdiv\u003eThis 16” long cast iron lathe bed extension installs on the 70-1824VSR and 70-1824VSR2 lathes in 3 different locations to expand the use of the lathe when positioning the tool rest to work on spindle or bowl \u0026amp; platter turnings. Special size of the extension will only fit the 70-1824VSR and 70-1824VSR2 lathes.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMounted on the end of the bed, it increases center-to-center length from 24” to 40” for spindle turning.\u003c\/li\u003e\n\u003cli\u003eMounted on the front of the bed, it gives extra positioning options for the tool rest base to access project surfaces.\u003c\/li\u003e\n\u003cli\u003eMounted on the left, outboard bed end, it increases swing from 18” to 22” for working bowls and platters.\u003c\/li\u003e\n\u003cli\u003eIncludes hardware to attach to the beds of the 70-1824VSR and 70-1824VSR2 lathes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) RIKON Lathe Bed Extension 16\"\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668920623467,"sku":"185084","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/185084_000_001_5e589bc4-a066-4bb4-ba1a-76357e88d357.jpg?v=1785958725"},{"product_id":"rikon-live-center-set-9-piece","title":"RIKON Live Center Set - 9 Piece","description":"\u003cdiv\u003eThe RIKON 9 Piece Live Center Set has a MT2, double bearing Live Center with 8 different centers. These centers offer a wide variety of holding options for all your turning needs. Centers are securely held in position with a MT1. The included knock out bar makes changing the centers quick and easy.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e9 Centers in set\u003c\/li\u003e\n\u003cli\u003eLarge Cup Center\u003c\/li\u003e\n\u003cli\u003eSmall Cup Center\u003c\/li\u003e\n\u003cli\u003eLarge Cone Center\u003c\/li\u003e\n\u003cli\u003eSmall Cone Center\u003c\/li\u003e\n\u003cli\u003e60 Degree Cone Center\u003c\/li\u003e\n\u003cli\u003eSmall 60 Degree Cone Center\u003c\/li\u003e\n\u003cli\u003eLarge Multi Tooth, Spring Point Center\u003c\/li\u003e\n\u003cli\u003eSmall Multi Tooth, Spring Point Center\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Live Center Set - 9 Piece\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668920656235,"sku":"192716","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192716_000_001.jpg?v=1785958725"},{"product_id":"rikon-large-curve-tool-rest-with-1-in-post","title":"RIKON Large Curve Tool Rest with 1 in Post","description":"\u003cdiv\u003eThe RIKON 11-3\/4\" Large Curve Tool Rest will become your favorite rest when turning large bowls. The generous curve of the rest allows it to be positioned for the bet support of gouges and scrapers when roughing or putting finish touches to your work.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eC-Curve is has a radius of approximately 2-3\/4\" (69mm)\u003c\/li\u003e\n\u003cli\u003e8mm diameter top rod is hardened steel to give smooth movement of tools over the rest\u003c\/li\u003e\n\u003cli\u003eCast iron body includes a 1\" diameter tool rest post 5-1\/8\" (130mm) long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1)  RIKON Large Curve Tool Rest with 1\" Post\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668921999723,"sku":"192720","price":76.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192720_000_001.jpg?v=1785958736"},{"product_id":"rikon-mini-lathe-stand-extension","title":"RIKON Mini Lathe Stand Extension","description":"\u003cp\u003eExpand your turning capacity with the RIKON Mini Lathe Stand Extension, designed to easily attach to your existing RIKON Mini Lathe Stand. This durable extension allows you to mount a bed extension, increasing the overall turning length for longer spindles, table legs, or other extended projects.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSturdy tubular steel design\u003c\/li\u003e\n\u003cli\u003ePowder coat finish\u003c\/li\u003e\n\u003cli\u003eExtension for RIKON Universal Mini\/Midi Lathe Stand Model 70-920 (WC#862698)\u003c\/li\u003e\n\u003cli\u003eAlso compatible with RIKON Mini Lathe stand 70-910\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) RIKON Mini Lathe Stand Extension\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668921966955,"sku":"833263","price":134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/833263_000_001.jpg?v=1785958736"},{"product_id":"rikon-carbide-bead-cutter-3-16-in","title":"RIKON Carbide Bead Cutter - 3\/16 in","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eAdd perfect detail to your turned projects with the RIKON Carbide Bead Cutter – 3\/16\". Designed for use with RIKON’s carbide insert turning tools, this precision-ground cutter produces smooth, consistent beads with minimal effort.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe solid carbide construction ensures exceptional edge retention and durability, staying sharper longer than high-speed steel alternatives. Ideal for creating decorative accents on pens, spindles, bowls, and furniture turnings, this cutter excels at producing clean, repeatable bead profiles with minimal sanding required.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCompatible with RIKON carbide insert turning tools\u003c\/li\u003e\n\u003cli\u003eIdeal for fine detail work\u003c\/li\u003e\n\u003cli\u003eDurable and heat-resistant design\u003c\/li\u003e\n\u003cli\u003eLow-maintenance cutter – requires no sharpening\u003c\/li\u003e\n\u003cli\u003eConsistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nBead diameter: 3\/16″\u003c\/li\u003e\n\u003cli\u003eBevel style: Negative rake top bevel — reduces grab\u003c\/li\u003e\n\u003cli\u003eIncludes: M4 x 9 mm T20 mounting screw.\u003c\/li\u003e\n\u003cli\u003eMaterial: Solid carbide cutter\u003c\/li\u003e\n\u003cli\u003eWeight (approx.): 0.5 lb as stated by vendor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003eM4 x 9mm T20 Mounting Screw\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668922917227,"sku":"192711","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192711_000_001.jpg?v=1785958744"},{"product_id":"rikon-carbide-bead-cutter-1-8-in","title":"RIKON Carbide Bead Cutter - 1\/8 in","description":"\u003cdiv\u003eThe RIKON 1\/8″ Carbide Bead Cutter (Model 70-824) is designed for creating crisp, consistent decorative beads on your turnings. Built with a negative-rake top bevel, it reduces catch and tear-out, giving you a smoother finish with less sanding. Made from solid carbide, this cutter holds its edge far longer than standard high-speed steel tools—ideal for pens, spindles, bowls or furniture accents where precision matters.\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003eUsed for cutting decoritive beads on any of your turned project. The cutter has a Negative Rake top bevel that reduces the grab of the cutter and provides a much cleaner finish.\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePrecision 1\/8\" bead profile, great for fine detailing on turned pieces.\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction.\u003c\/li\u003e\n\u003cli\u003eNegative-rake top bevel—reduces grab.\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware (M4 × 9 mm T20 screw) for quick installation.\u003c\/li\u003e\n\u003cli\u003eIdeal for use on spindles, bowls, pens, or detailed furniture components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eModel Number: \u003cb\u003e70-824\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eBead Size:1\/8\"\u003c\/li\u003e\n\u003cli\u003eTop Bevel Style: Negative rake bevel for smoother cut finish\u003c\/li\u003e\n\u003cli\u003eMaterial: Solid carbide cutter\u003c\/li\u003e\n\u003cli\u003eIncluded Hardware: M4 × 9 mm T20 mounting screw\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e4 x 9mm T20 Mounting Screw\u003c\/li\u003e\n\u003cli\u003eCarbide Bead Cutter 1\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668923015531,"sku":"192712","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192712_000_001.jpg?v=1785958744"},{"product_id":"rikon-pin-jaw-set-17-mm-0-7-in-with-9-mm-bore","title":"RIKON Pin Jaw Set - 17 mm (0.7 in) with 9 mm Bore","description":"\u003cdiv\u003ePin Jaws operate like a pin chuck but without the hassle! The extended 25 mm (1\") length cylindrical jaw expands into a 25 mm (1\") or larger hole and grips the workpiece like a traditional pin chuck. It can also be used as compression mode spigot jaws.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eWorks like a pin chuck\u003c\/li\u003e\n\u003cli\u003eextended 25 mm length makes the jaws suitable for deeper or larger bores, broadening their utility\u003c\/li\u003e\n\u003cli\u003eCan also be used as compression mode spigot jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eSize: 17 mm (0.7\")\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON Pin Chuck Accessory Jaw Set - 17 mm (0.7\") with 9 mm Bore\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668922982763,"sku":"191254","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191254_000_001.jpg?v=1785958744"},{"product_id":"rikon-power-grip-chuck-accessory-jaw-set-75-mm-3-in","title":"RIKON Power Grip Chuck Accessory Jaw Set - 75 mm (3 in)","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eHandle larger and heavier turning projects with confidence using the RIKON Power Grip Chuck Accessory Jaw Set – 75 mm (3\"). Designed for use with RIKON 4-jaw chucks, this heavy-duty jaw set delivers exceptional holding strength for bowls, platters, and other wide workpieces.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe deep, serrated grip design provides maximum holding power in both expansion and contraction modes, ensuring your workpiece stays secure throughout the turning process. Made from precision-machined hardened steel, these jaws maintain accuracy and balance while resisting wear under demanding use.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eRIKON’s most powerful jaw on the market\u003c\/li\u003e\n\u003cli\u003eDesigned for turning large spigot\/hollow forms using larger RIKON chucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003eSize: 75 mm (3\")\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/div\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON Power Grip Chuck Accessory Jaw Set - 75 mm (3\")\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668923277675,"sku":"191248","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191248_000_001.jpg?v=1785958751"},{"product_id":"rikon-3-4-in-bowl-gouge-blade-only-for-70-800-turning-set","title":"RIKON 3\/4 in Bowl Gouge Blade only for 70-800 Turning Set","description":"\u003cdiv\u003eTraditional style 3\/4\" Bowl Gouge for use with RIKON's 70-800 Woodturning System. Made with M2 High Speed Steel that is noted for resisting high heat and retaining sharp edges. This means you get longer times turning before having to re-sharpen a dull cutting edge. This large diameter gouge is great for quickly shaping roughed-out bowl blanks prior to its final finished design.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMade of M2 High Speed Steel\u003c\/li\u003e\n\u003cli\u003e3\/4\" (19.46mm) Diameter, 13-3\/8\" OAL with 10\" long blade, 7-1\/2\" grind.\u003c\/li\u003e\n\u003cli\u003eSpecial 14mm diameter shaft end fits into RIKON's 70-801 16\" Handle's collet chuck for use\u003c\/li\u003e\n\u003cli\u003eGouge is factory ground and requires final sharpening before use\u003c\/li\u003e\n\u003cli\u003eONLY for 70-800 Turning Set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003eWhat's Included:\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) 3\/4\" Bowl Gouge Blade for Model 70-800\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668923408747,"sku":"192715","price":134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192715_000_001.jpg?v=1785958752"},{"product_id":"rikon-z3-4-jaw-lathe-chuck-insert-version","title":"RIKON Z3 4-Jaw Lathe Chuck - Insert Version","description":"\u003cdiv\u003eRIKON’s Z3 4-Jaw Chuck Kit 71-105 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This self-centering chuck is CNC precision-made from high tensile steel and features a geared jaw system for easy operation and excellent project-holding power. The redesigned chuck sliders provide added strength for securely attaching a variety of compatible jaw set accessories. Meticulously machined, the chuck body and internal gearing ensure smooth and reliable opening and closing with the included special chuck key.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eRequires a threaded insert adapter before it can be mounted on a lathe (sold separately)\u003c\/li\u003e\n\u003cli\u003eDifferent threaded insert options available\u003c\/li\u003e\n\u003cli\u003eExtra-fine finish with etched safety icons and serial number\u003c\/li\u003e\n\u003cli\u003eIncludes a 50 mm (2″) jaw set accessory -- one of the most popular standard jaw styles for holding bowl or spindle\/tenon projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecificaions:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor use on lathes with a 10″ to 14″ swing\u003c\/li\u003e\n\u003cli\u003eWeighs approximately 2.9 lb with your selected threaded insert (sold separately)\u003c\/li\u003e\n\u003cli\u003e10 year warranty\u003c\/li\u003e\n\u003cli\u003e3-1\/2″ (88mm) in diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e(1) Z3 4-Jaw Chuck\u003c\/li\u003e\n\u003cli\u003e(1) 50 mm (2\") Jaw Set\u003c\/li\u003e\n\u003cli\u003e(1) Wood Screw RH\u003c\/li\u003e\n\u003cli\u003e(1) Chuck Key\u003c\/li\u003e\n\u003cli\u003e(1) T-handle T20 Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 3 mm Hex Wrench\u003c\/li\u003e\n\u003cli\u003e10 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668923343211,"sku":"191235","price":112.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191235_000_001.jpg?v=1785958752"},{"product_id":"rikon-z4-4-jaw-lathe-chuck-insert-version","title":"RIKON Z4 4-Jaw Lathe Chuck - Insert Version","description":"\u003cdiv\u003eRIKON’s Z4 4-Jaw Chuck Kit 71-106 is the perfect wood lathe accessory for turning bowls, platters, spindles and decorative pieces. This larger, heavy-duty self-centering chuck is CNC precision-made from high tensile steel and features a geared jaw system for easy operation and excellent project-holding power. The redesigned chuck sliders provide added strength for securely attaching a variety of compatible jaw set accessories. Meticulously machined, the chuck body and internal gearing ensure smooth and reliable opening and closing with the included special chuck key.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFor use on larger lathes with swings 14″ and above\u003c\/li\u003e\n\u003cli\u003eRequires a threaded insert adapter before it can be mounted on a lathe (sold separately)\u003c\/li\u003e\n\u003cli\u003eDifferent threaded insert options available\u003c\/li\u003e\n\u003cli\u003eExtra-fine finish with etched safety icons and serial number\u003c\/li\u003e\n\u003cli\u003eIncludes a 50 mm (2″) jaw set accessory -- one of the most popular standard jaw styles for holding bowl or spindle\/tenon projects\u003c\/li\u003e\n\u003cli\u003eJaw sets in additional sizes and shapes available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3-7\/8″ (98.5 mm) in diameter\u003c\/li\u003e\n\u003cli\u003eWeighs approximately 4 lb including threaded insert (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003e​​​​​​​What’s Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Z4 4-Jaw Chuck\u003c\/li\u003e\n\u003cli\u003e(1) 50 mm (2\") Jaw Set\u003c\/li\u003e\n\u003cli\u003e(1) Wood Screw RH\u003c\/li\u003e\n\u003cli\u003e(1) Chuck Key\u003c\/li\u003e\n\u003cli\u003e(1) T-handle T20 Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 3 mm Hex Wrench\u003c\/li\u003e\n\u003cli\u003e10 year warranty\u003c\/li\u003e\n\u003cli\u003eIncludes a 50 mm (2″) jaw set accessory -- one of the most popular standard jaw styles for holding bowl or spindle\/tenon projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668923310443,"sku":"191236","price":143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191236_000_001.jpg?v=1785958751"},{"product_id":"rikon-mini-chuck-accessory-jaw-set-25-mm-1-in","title":"RIKON Mini Chuck Accessory Jaw Set - 25 mm (1 in)","description":"\u003cdiv\u003eThe 25 mm Mini Jaw Set is a substitute for the standard 50 mm jaws for small projects. It works with 3\/8\" to 1-1\/4\" spigots as a 1\" capacity pin chuck, for expanding dovetail work on bowls up to 6\" in diameter and for 1\/2\" to 1\" square blanks.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSubstitute for the standard 50 mm jaws\u003c\/li\u003e\n\u003cli\u003eWorks with 3\/8\" to 1-1\/4\" spigots as a 1\" capacity pin chuck\u003c\/li\u003e\n\u003cli\u003eGreat for working on bowls up to 6\" in diameter and ½\" to 1\" square blanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) 25 mm (1\") Mini Jaws\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668923670891,"sku":"191242","price":49.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191242_000_001.jpg?v=1785958759"},{"product_id":"rikon-carbide-tenon-cutter","title":"RIKON Carbide Tenon Cutter","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eCreate smooth, perfectly sized tenons with the \u003cstrong\u003eRIKON Carbide Tenon Cutter\u003c\/strong\u003e—a durable, precision-engineered tool designed for strength, accuracy, and long service life.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eBuilt with \u003cstrong\u003esolid carbide blades\u003c\/strong\u003e, this cutter produces clean, chatter-free cuts on round stock, ensuring tight, consistent joints for furniture, railing, and rustic woodworking projects. The precision-ground carbide stays sharp far longer than traditional steel cutters, maintaining accuracy even after extended use.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCutter has 8 degree bevel on the front and left side cutting edges. The 77 degree angle between the two cutting edges matches the dovetail angle on most popular chuck jaws.\u003c\/li\u003e\n\u003cli\u003ePrecision ground carbide blades\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction\u003c\/li\u003e\n\u003cli\u003eCompatible with standard drill setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003eM4 x 9mm T20 Mounting Screw\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668923736427,"sku":"192710","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192710_000_001.jpg?v=1785958759"},{"product_id":"rikon-step-chuck-accessory-jaw-set-53-mm-2-08-in","title":"RIKON Step Chuck Accessory Jaw Set - 53 mm (2.08 in)","description":"\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003eExpand your turning versatility with the RIKON Step Chuck Accessory Jaw Set – 53 mm (2.08\"). Designed for use with RIKON 4-jaw chucks, this precision-machined jaw set securely grips small and medium-sized workpieces with exceptional accuracy.\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe stepped jaw design allows multiple gripping diameters without the need to change jaws, making it ideal for turning small bowls, boxes, and detailed spindle projects. Crafted from hardened steel, these jaws deliver consistent holding strength and durability for both expansion and contraction chucking.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThree different dovetail steps\u003c\/li\u003e\n\u003cli\u003eGrips bowl feet from 1-1\/2\" to 3-5\/16\"\u003c\/li\u003e\n\u003cli\u003eOutside expanding dovetail fits recess of 3-7\/16\" to 4-1\/4\" for bowls and up to 12\" for platters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON Step Chuck Accessory Jaw Set - 53 mm (2.08\")\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668924064107,"sku":"191246","price":67.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191246_000_001.jpg?v=1785958767"},{"product_id":"rikon-cole-jaw-chuck-accessory-305-mm-12-in","title":"RIKON Cole Jaw Chuck Accessory - 305 mm (12 in)","description":"\u003cdiv\u003eThe Large Cole Jaw Set features a 305 mm (12\") bowl diameter capacity and is designed for the re-chucking of bowls and platters to remove chuck marks, add decoration or reshape the bottoms of previously turned bowls and platters. Suitable for lathes with a minimum 16\" swing diameter, this set is made of die-cast aluminum with preset holes for precise closing, durability, and long life.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFor use with lathes with a 16\" or great swing diameter\u003c\/li\u003e\n\u003cli\u003e305 mm (12\") bowl diameter capacity\u003c\/li\u003e\n\u003cli\u003eConstructed of durable die-cast aluminum with preset holes\u003c\/li\u003e\n\u003cli\u003eDesigned to remove chuck marks, add decoration or reshape bottoms of previously turned bowls and platters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) RIKON Cole Jaw Chuck Accessory - 305 mm (12\")\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668924227947,"sku":"191261","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191261_000_001.jpg?v=1785958767"},{"product_id":"rikon-standard-wood-screw-rh","title":"RIKON Standard Wood Screw RH","description":"\u003cdiv\u003eStandard Wood Screw RH - RIKON Chucks Z3 and Z4\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\u003cli\u003eStandard RH Wood Screw for Chuck System\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\u003cli\u003e(1) Standard Wood Screw RH\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668925145451,"sku":"191269","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191269_000_001.jpg?v=1785958777"},{"product_id":"rikon-carbide-mortise-cutter","title":"RIKON Carbide Mortise Cutter","description":"\u003cdiv\u003eMake clean, precise mortises every time with the \u003cstrong\u003eRIKON Carbide Mortise Cutter\u003c\/strong\u003e—engineered for long-lasting sharpness and professional-grade performance. Designed for use with RIKON’s mortising machines, this cutter features a \u003cstrong\u003esolid carbide construction\u003c\/strong\u003e that holds its edge longer than standard HSS bits, ensuring smoother cuts and reduced heat buildup during operation.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCutter has 8 degree bevel on the front and left side cutting edges. The 80 degree angle between the two cutting edges matches the dovetail angle on most popular chuck jaws.\u003c\/li\u003e\n\u003cli\u003eCutter is packaged with spare M4 x 9mm T20 Mounting Screw.\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction\u003c\/li\u003e\n\u003cli\u003eLong Lasting Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003eM4 x 9mm T20 Mounting Screw\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668925112683,"sku":"192709","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192709_000_001.jpg?v=1785958778"},{"product_id":"rikon-small-curve-tool-rest-top-only","title":"RIKON Small Curve Tool Rest - Top Only","description":"\u003cdiv\u003eThe RIKON 4-3\/4\" Long Small Curve Tool Rest is the perfect 'C' shape to support turning tools when working on small round projects, exterior or interior surfaces of bowls, urns, balls, ornaments, etc..\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e1-3\/16\" (30mm) tall curved rest is made of hardened steel to give smooth movement of tools over the rest when turning\u003c\/li\u003e\n\u003cli\u003eRest includes the TOP ONLY, and requires your choice of length and diameter of PRO tool Rest Posts, available separately\u003c\/li\u003e\n\u003cli\u003eHub end of the rest is threaded M12x1.25 so that it can be mounted on posts from either side, depending on your work support needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1)  RIKON Small Curve Tool Rest\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668925210987,"sku":"192719","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192719_000_001.jpg?v=1785958778"},{"product_id":"rikon-50mm-2-in-faceplate-ring-for-50mm-jaws","title":"RIKON 50 mm (2 in) Faceplate Ring for 50 mm Jaws","description":"\u003cdiv\u003eA convenient alternative to a traditional faceplate, this 50mm (2″) Faceplate Ring lets you switch between projects quickly without removing your chuck. Designed to fit 50mm (2″) jaws, it’s perfectly sized for turning mid-size bowls.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFaceplate ring fits a 50mm (2 Inch) jaw\u003c\/li\u003e\n\u003cli\u003eQuickly and easily swap between projects\u003c\/li\u003e\n\u003cli\u003eKeep chuck on the lathe during turning steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e50mm (2\")\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\u003cli\u003e(1) 50mm (2\") Faceplate Ring for 50mm Jaws\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668925407595,"sku":"191262","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191262_000_001.jpg?v=1785958785"},{"product_id":"rikon-small-j-tool-rest-top-only","title":"RIKON Small J Tool Rest - Top Only","description":"\u003cdiv\u003eThe  RIKON Small 8-1\/4\" long x 1-5\/16\" high J-Curve Tool Rest is great for supporting turning tools when hollowing inside surfaces of small to mediaum sized bowls and vessels. The straight section of the rest supports tools when working on the exterior of turnings as well.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eJ-Curve at the end of the rest has a radius of 1-7\/8\" (48mm)\u003c\/li\u003e\n\u003cli\u003eRest includes the TOP ONLY, and requires your choice of length and diameter of PRO tool Rest Posts, available separately\u003c\/li\u003e\n\u003cli\u003e8mm diameter top rod is hardened steel to give smooth movement of tools over the rest when turning\u003c\/li\u003e\n\u003cli\u003eBody of the rest is cast iron with threaded base M12x1.25 to mount on tool rest posts (available separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Small J Tool Rest - Top\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668925604203,"sku":"192717","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/192717_000_001.jpg?v=1785958785"},{"product_id":"rikon-chuck-insert-m33-x-3-5-iso-rh","title":"RIKON Chuck Insert - M33 x 3.5 ISO RH","description":"\u003cdiv\u003eThis threaded Insert converts RIKON's 4-Jaw Chucks that require inserts to fit onto lathes with M33 threaded spindles. The Insert's internal threads are precision machined to M33x3.5 ISO RH specifications for perfect chuck lathe mounting and running-true use. Insert's external threads install into the backs of RIKON insert-type chuck bodies only.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThread Size: M33 x 3.5 ISO Right-Hand\u003c\/li\u003e\n\u003cli\u003eMaterial: Precision-machined hardened steel\u003c\/li\u003e\n\u003cli\u003ePurpose: Allows chucks to fit lathes with M33 x 3.5 RH spindle thread\u003c\/li\u003e\n\u003cli\u003eAccurate, vibration-free fit ensures smooth turning performance\u003c\/li\u003e\n\u003cli\u003eCompatible with RIKON and other ISO-standard European spindle-thread lathes\u003c\/li\u003e\n\u003cli\u003eEasy installation and removal for quick chuck changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Chuck Insert M33 X 3.5 ISO RH\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668927996267,"sku":"191237","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191237_000_001.jpg?v=1785958804"},{"product_id":"rikon-chuck-insert-m30-x-3-5rh","title":"RIKON Chuck Insert - M30 x 3.5RH","description":"\u003cdiv\u003eThis threaded Insert converts RIKON's 4-Jaw Chucks that require inserts to fit onto lathes with M30 x 3.5 RH threaded spindles. The Insert's internal threads are precision machined to M30 x 3.5 RH specifications for perfect chuck lathe mounting and running-true use. Insert's external threads install into the backs of RIKON insert-type chuck bodies only.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePrecision machined to internal thread spec M30 × 3.5 RH for exact fit on compatible lathe spindles\u003c\/li\u003e\n\u003cli\u003eExternal thread designed to screw into RIKON insert-type chuck bodies\u003c\/li\u003e\n\u003cli\u003eConstructed from solid, hardened steel for durability\u003c\/li\u003e\n\u003cli\u003eAllows flexible chuck usage across different lathes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eModel Number: 71-123\u003c\/li\u003e\n\u003cli\u003eInternal Thread (lathe spindle side): M30 × 3.5 RH\u003c\/li\u003e\n\u003cli\u003eExternal Thread (chuck body side): Matches RIKON insert-type chuck bodies (Z3\/Z4 series)\u003c\/li\u003e\n\u003cli\u003eMaterial: Precision-machined Hardened Steel\u003c\/li\u003e\n\u003cli\u003eCompatible With: RIKON Z3\/Z4 insert-style chucks, lathes with M30 × 3.5 RH spindle thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhats Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Chuck Insert M30 x 3.5RH\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 7-21 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eResidential delivery fee applies for all LTL items.\u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eIf you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. \u003c\/p\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. \u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. \u003c\/p\u003eTo be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: \u003cul\u003e\u003c\/ul\u003eWritten authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRikon offers a 5 year warranty.\u003c\/strong\u003eCustomers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate.\u003c\/p\u003e\n\u003cp\u003eRequest to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. \u003c\/p\u003e\n\u003cp\u003eDefective\/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RIKON","offers":[{"title":"Default Title","offer_id":53668928029035,"sku":"191240","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/191240_000_001.jpg?v=1785958804"}],"url":"https:\/\/projectfoundry.co\/collections\/woodturning.oembed","provider":"Project Foundry","version":"1.0","type":"link"}