{"product_id":"katool-kt-as110d-two-post-asymmetrical-vehicle-lift-11-000lbs-single-point-lock-release","title":"Katool KT-AS110D 11,000 lb Asymmetric Two-Post Lift — Direct Drive, Single-Point Lock Release","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Katool KT-AS110D is an \u003cstrong\u003e11,000 lb capacity\u003c\/strong\u003e asymmetric two-post lift — the configuration shops pick when door access matters. The three-stage front arms tuck short (29.9\") so the vehicle sits back in the bay, letting doors swing open past the columns instead of into them, then extend to 61\" for frame-contact points on long vehicles. Rear two-stage arms cover 30.7\"–50.4\". It is \u003cstrong\u003eCE Approved and Certified\u003c\/strong\u003e, built to the 115% dynamic loading standard and tested at 150% static load.\u003c\/p\u003e\n\u003cp\u003eLifting is by \u003cstrong\u003edirect-drive hydraulic cylinders\u003c\/strong\u003e — no chains in the drive path — and lowering is handled from one station: the \u003cstrong\u003esingle-point lock release\u003c\/strong\u003e drops both columns' locks together, no walking around the vehicle with a bar. A padded overhead safety shutoff bar stops travel before a roof meets the crossbeam, rubber door-opening pads protect panels during positioning, and feet-protection guardrails with an integrated toolbox keep the base area safe and organized.\u003c\/p\u003e\n\u003cp\u003eThe columns are \u003cstrong\u003eQ235 and Q245 steel\u003c\/strong\u003e, and the adjustable support adapters extend from 3.94\" to 6\" for frame-rail contact on trucks and SUVs. The power unit runs \u003cstrong\u003e220V\/60Hz single-phase, with a 110V option\u003c\/strong\u003e for garages without a 220V circuit — and the lift ships from five US warehouses (Los Angeles, Chicago, Houston, New York, Savannah).\u003c\/p\u003e\n\u003cp\u003ePrefer a symmetric setup for heavier, centered loads? The \u003ca href=\"\/products\/katool-kt-m110-two-post-clear-floor-vehicle-lift-11-000lbs\"\u003eKatool KT-M110 clear-floor two-post\u003c\/a\u003e is the same 11,000 lb class with symmetric arms.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e11,000 lb capacity\u003c\/strong\u003e, CE Approved — 115% dynamic \/ 150% static tested.\u003c\/li\u003e\n\u003cli\u003eAsymmetric arm design: 3-stage front arms (29.9\"–61\"), 2-stage rear arms (30.7\"–50.4\").\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-drive cylinders\u003c\/strong\u003e and single-point lock release.\u003c\/li\u003e\n\u003cli\u003ePadded overhead safety shutoff bar.\u003c\/li\u003e\n\u003cli\u003eRubber door-opening protection pads on both columns.\u003c\/li\u003e\n\u003cli\u003eFeet-protection safety guardrails with integrated toolbox.\u003c\/li\u003e\n\u003cli\u003eAdjustable support adapters, 3.94\" to 6\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ235\/Q245 steel construction\u003c\/strong\u003e, 3\/8\" lifting cables.\u003c\/li\u003e\n\u003cli\u003e220V\/60Hz single-phase standard; 110V optional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eKatool KT-AS110D Specifications\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLifting capacity\u003c\/td\u003e\n\u003ctd\u003e11,000 lbs (4,990 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax lifting height\u003c\/td\u003e\n\u003ctd\u003e70.75\" (1,800 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin pad height\u003c\/td\u003e\n\u003ctd\u003e3.74\" (95 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e141.25\" (3,587 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e134.65\" (3,420 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth outside columns\u003c\/td\u003e\n\u003ctd\u003e120.4\" (3,058 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth inside columns\u003c\/td\u003e\n\u003ctd\u003e109.37\" (2,778 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive-thru clearance\u003c\/td\u003e\n\u003ctd\u003e99.61\" (2,530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront arm reach (3-stage)\u003c\/td\u003e\n\u003ctd\u003e29.9\" – 61\" (760–1,550 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear arm reach (2-stage)\u003c\/td\u003e\n\u003ctd\u003e30.7\" – 50.4\" (780–1,280 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport adapters\u003c\/td\u003e\n\u003ctd\u003e3.94\" – 6\" adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eQ235 and Q245 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e220VAC\/60Hz\/1PH (110V optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1,323 lbs (600 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cem\u003eConcrete: minimum 5.9\" (150 mm) thickness at 3,000 PSI. Verify your slab before installation.\u003c\/em\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eKatool covers the KT-AS110D with a \u003cstrong\u003e12-month all-parts warranty\u003c\/strong\u003e — cylinders, power unit, motor, and electronics — plus a \u003cstrong\u003e3-year warranty on structural components\u003c\/strong\u003e. Replacement parts ship free; labor is not included, and claims require the original order number.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhy asymmetric instead of symmetric?\u003c\/h3\u003e\n\u003cp\u003eAsymmetric arms set the vehicle rearward so doors open past the columns — the practical difference is getting in and out of the car while it is on the lift. For heavier, centered loads where door access matters less, a symmetric lift like the KT-M110 spreads weight evenly.\u003c\/p\u003e\n\u003ch3\u003eDo I need 220V power?\u003c\/h3\u003e\n\u003cp\u003eThe standard power unit is 220V\/60Hz single-phase; a 110V option is available — specify it when ordering if your garage lacks a 220V circuit.\u003c\/p\u003e\n\u003ch3\u003eWhat concrete do I need?\u003c\/h3\u003e\n\u003cp\u003eMinimum 5.9\" (150 mm) thickness rated 3,000 PSI. The columns are supported entirely by their anchors, so this is a hard requirement, not a suggestion.\u003c\/p\u003e\n\u003ch3\u003eHow tall does my ceiling need to be?\u003c\/h3\u003e\n\u003cp\u003eOverall height is 141.25\" — a bay just under 12 feet clears the crossbeam, and the overhead shutoff bar protects tall vehicles from being raised into it.\u003c\/p\u003e\n\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/Katool-KT-AS110D-2-Post-Lift-Manual.pdf?v=1734619324\" rel=\"noopener noreferrer\" aria-label=\"Katool KT-AS110D two-post lift user manual PDF, opens in new tab\"\u003e\n   Katool KT-AS110D User Manual (PDF)\n\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eVideos\u003c\/h2\u003e\n\u003cp\u003eKatool's official product walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003c\/div\u003e\n\u003cp\u003eInstallation guide:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003c\/div\u003e","brand":"Katool","offers":[{"title":"Warehouse Pickup","offer_id":53558775611755,"sku":"KT-AS110D","price":2599.0,"currency_code":"USD","in_stock":true},{"title":"Ship to My Address","offer_id":53558775644523,"sku":"KT-AS110D-S","price":2949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/katool-kt-as110d-two-post-asymmetrical-vehicle-lift-11-000lbs-single-point-lock-release-hero.jpg?v=1784214140","url":"https:\/\/projectfoundry.co\/products\/katool-kt-as110d-two-post-asymmetrical-vehicle-lift-11-000lbs-single-point-lock-release","provider":"Project Foundry","version":"1.0","type":"link"}