{"product_id":"triumph-nt-16-16-000-lb-two-post-lift","title":"Triumph NT-16 16,000 lb Two Post Auto Lift","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTriumph NT-16\u003c\/strong\u003e is a \u003cstrong\u003e16,000-lb floor-plate two-post auto lift\u003c\/strong\u003e built for full-time shop use on full-size trucks, vans, and heavy SUVs. The columns connect at the floor with a low-profile drive-over plate, so there is no overhead bar to drop ceiling clearance, useful in shops with bays under nine feet of headroom where an overhead-bar lift would not fit.\u003c\/p\u003e\n\u003cp\u003eLifting is handled by \u003cstrong\u003edual hydraulic chain-assist cylinders\u003c\/strong\u003e built to ANSI standards with NOK oil seals, paired with self-lubricating UHMW polyethylene sliders and bronze bushings on the carriage. Four symmetric arms swing under the vehicle on telescoping inner and outer sections, finished with rubber lift pads and a stackable adapter set in 1.5-inch, 3-inch, and 6-inch heights for trucks and SUVs that need extra reach. A single-point safety release with dual safety design holds the lift on lock, and an electrical override automatic safety shut-off cuts power if the carriage hits an out-of-range condition.\u003c\/p\u003e\n\u003cp\u003eThe NT-16 lifts from a 7-inch lowered height to a maximum lifting height of 72 inches in 40 seconds, on a 220V AC single-phase circuit driving a 3 HP motor. Both \u003cstrong\u003eISO 9001\u003c\/strong\u003e manufacturing and \u003cstrong\u003eCE\u003c\/strong\u003e conformity are stated by the supplier. The lift ships freight with truck adapters and mounting hardware included; the standard \u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e applies.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e16,000-lb lifting capacity\u003c\/strong\u003e for full-size trucks, vans, and heavy SUVs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFloor-plate (base-plate) design\u003c\/strong\u003e, no overhead bar; suits shops with limited ceiling height\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual hydraulic chain-assist cylinders\u003c\/strong\u003e, built to ANSI standards with NOK oil seals\u003c\/li\u003e\n  \u003cli\u003eSelf-lubricating UHMW polyethylene sliders and bronze bushings on the carriage\u003c\/li\u003e\n  \u003cli\u003eSymmetric four-arm configuration with telescoping inner and outer sections\u003c\/li\u003e\n  \u003cli\u003eStackable rubber-pad adapter set: 1.5-inch, 3-inch, and 6-inch extensions for SUVs and trucks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-point safety release\u003c\/strong\u003e with dual safety design\u003c\/li\u003e\n  \u003cli\u003eElectrical override with automatic safety shut-off\u003c\/li\u003e\n  \u003cli\u003e40-second lift time on a 220V AC, 3 HP single-phase power unit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO 9001 manufacturing\u003c\/strong\u003e and \u003cstrong\u003eCE\u003c\/strong\u003e conformity stated by Triumph\u003c\/li\u003e\n  \u003cli\u003eTruck adapters and mounting hardware included at no extra charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cfigure\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-nt-16-16-000-lb-two-post-lift-dimensions.webp?v=1778765441\" alt=\"Triumph NT-16 two-post lift dimensions diagram: 120-inch overall height, 142-inch overall width, 114-inch between posts, 100-inch drive-through, 7- to 72-inch lift range, 32- to 49.25-inch arm reach.\"\u003e\n  \u003cfigcaption\u003eNT-16 dimensions per Triumph: 120\" overall height, 142\" overall width, 114\" between posts, 100\" drive-through, 7\"-72\" lift range, 32\"-49.25\" arm reach.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo columns (power side and offside) with floor-plate connecting bar\u003c\/li\u003e\n  \u003cli\u003eHydraulic power unit (220V AC, 3 HP, single-phase)\u003c\/li\u003e\n  \u003cli\u003eFour symmetric lifting arms with rubber lift pads\u003c\/li\u003e\n  \u003cli\u003eStackable adapter set: 1.5-inch, 3-inch, and 6-inch extensions\u003c\/li\u003e\n  \u003cli\u003eTruck adapters\u003c\/li\u003e\n  \u003cli\u003eMounting hardware (anchor bolts, washers, nuts)\u003c\/li\u003e\n  \u003cli\u003eHydraulic hoses and synchronizing cables\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eTriumph NT-16 Specifications\u003c\/th\u003e\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLifting capacity\u003c\/td\u003e\n\u003ctd\u003e16,000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLifting height (max)\u003c\/td\u003e\n\u003ctd\u003e72\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLowered height\u003c\/td\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLift time\u003c\/td\u003e\n\u003ctd\u003e40 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e120\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e142\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDistance between posts\u003c\/td\u003e\n\u003ctd\u003e114\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDrive-through width\u003c\/td\u003e\n\u003ctd\u003e100\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eArm reach (min-max)\u003c\/td\u003e\n\u003ctd\u003e32\" - 49.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eBase plate size\u003c\/td\u003e\n\u003ctd\u003e20\" × 20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e220V AC, 3 HP, single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eArm configuration\u003c\/td\u003e\n\u003ctd\u003eSymmetric\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTruck adapters\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMounting hardware\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e2,000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eISO 9001, CE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eConcrete requirement\u003c\/td\u003e\n\u003ctd\u003e3,000 PSI minimum, 6\" minimum thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cem\u003eInstalls on a level, cured concrete floor that meets the spec above. Confirm your electrical service (220V AC single-phase, 30-amp breaker, 10-gauge wire minimum) before purchase.\u003c\/em\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eThe Triumph NT-16 ships with a \u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e. Defective parts are replaced within the warranty period; labor, freight, and consumables are not covered. Contact \u003ca href=\"mailto:support@projectfoundry.co\"\u003esupport@projectfoundry.co\u003c\/a\u003e or call \u003ca href=\"tel:+13312725655\"\u003e331-272-5655\u003c\/a\u003e to start a warranty claim.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill the NT-16 fit in a shop with a low ceiling?\u003c\/h3\u003e\n\u003cp\u003eThe lift itself measures 120 inches (10 feet) at its overall height, and the floor-plate design has no overhead bar above the columns. The ceiling needs to clear the columns plus the height of the tallest vehicle being raised to the working position, plan ceiling height accordingly.\u003c\/p\u003e\n\n\u003ch3\u003eSymmetric or asymmetric arms?\u003c\/h3\u003e\n\u003cp\u003eSymmetric. All four arms are the same length, and the columns face each other directly. This puts the vehicle centered between the columns rather than offset toward the driver-side door, which is the asymmetric pattern.\u003c\/p\u003e\n\n\u003ch3\u003eWhat electrical service is required?\u003c\/h3\u003e\n\u003cp\u003eThe 3 HP power unit runs on 220V AC, single-phase. The manual lists a 30-amp breaker and minimum 10-gauge wire as the recommended electrical service. Confirm your shop has a dedicated 220V single-phase circuit available before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eIs professional installation required?\u003c\/h3\u003e\n\u003cp\u003eTriumph provides the mounting hardware and a product manual covering layout, anchor-bolt installation, hydraulic hook-up, cable adjustment, and test run. Many shop owners install in-house with a helper; installation by a third-party contractor is also common. Project Foundry does not include installation in the base price.\u003c\/p\u003e\n\n\u003ch3\u003eHow is the lift delivered?\u003c\/h3\u003e\n\u003cp\u003eThe NT-16 ships freight on an LTL common carrier on a 48-foot semi truck. \u003cstrong\u003eYou are responsible for unloading the lift from the truck\u003c\/strong\u003e, the driver will not unload it for you, and lift-gate service is not available for auto lifts. Plan for a forklift, Bobcat, tractor, tow truck, or backhoe at the receiving location. If you cannot unload at your location, Project Foundry can ship to the carrier's nearest freight terminal for pickup with a trailer or moving van. You are responsible for scheduling the delivery appointment with the freight company.\u003c\/p\u003e\n\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-nt-16-16-000-lb-two-post-lift-manual.pdf?v=1778765444\" rel=\"noopener noreferrer\" aria-label=\"Download the Triumph NT-16 product manual PDF, opens in new tab\"\u003eTriumph NT-16 Product Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Triumph","offers":[{"title":"Warehouse Pickup","offer_id":53427096682859,"sku":"NT-16","price":5145.0,"currency_code":"USD","in_stock":true},{"title":"Ship to My Address","offer_id":53427096715627,"sku":"NT-16-S","price":6000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/triumph-nt-16-16-000-lb-two-post-lift-hero.webp?v=1782424476","url":"https:\/\/projectfoundry.co\/products\/triumph-nt-16-16-000-lb-two-post-lift","provider":"Project Foundry","version":"1.0","type":"link"}