{"product_id":"triumph-usa8000-8-000-lb-service-storage-4-post-automotive-lift","title":"Triumph USA8000 8,000 lb Service \u0026 Storage 4-Post Lift, Made in the USA","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTriumph USA8000\u003c\/strong\u003e is an \u003cstrong\u003e8,000-lb four-post automotive lift\u003c\/strong\u003e built for both vehicle service and long-term storage. Drive the vehicle onto the diamond-plate runways, raise it on a single control, and the lift locks automatically, so the same machine that lets you work underneath also doubles your garage floor for a second car. The frame is \u003cstrong\u003eMade in the USA\u003c\/strong\u003e on a design that has been in service for more than 20 years. At 8,000 lb, it covers most cars, light trucks, and SUVs.\u003c\/p\u003e\u003cp\u003eLifting is handled by a hydraulic power unit that runs on \u003cstrong\u003estandard 110-volt household power\u003c\/strong\u003e, so no dedicated 220-volt circuit is required. As the runways rise, automatic safety latches engage at \u003cstrong\u003e14 locking positions\u003c\/strong\u003e, and a \u003cstrong\u003esingle-point lock release\u003c\/strong\u003e drops all four columns together when you are ready to lower. Full travel takes about \u003cstrong\u003e40 seconds\u003c\/strong\u003e to the \u003cstrong\u003e73-inch maximum lift height\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIn the interest of full transparency: the frame and structure are made in the USA, but the \u003cstrong\u003epower unit is not made in the USA\u003c\/strong\u003e.\u003c\/p\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-usa8000-8-000-lb-service-storage-4-post-automotive-lift-feature-1.webp?v=1780055665\" alt=\"Triumph USA8000 four-post lift lowered and empty, with three drip trays between the runways and two approach ramps down\"\u003e\u003cfigcaption\u003eLowered and empty: drive-on ramps down, three drip trays seated between the runways.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch3\u003eSite and electrical requirements\u003c\/h3\u003e\u003cp\u003ePer the installation manual, the lift should be set on a minimum of \u003cstrong\u003e4 inches of 3,500-psi steel-reinforced concrete\u003c\/strong\u003e with no more than 2 degrees of slope, not on asphalt or wood. The power unit plugs into a 110-volt outlet. Plan for overhead clearance as well: the runways rise to a 73-inch lift height, so the total clearance you need is 73 inches plus the height of your vehicle.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8,000-lb capacity\u003c\/strong\u003e carried across two full-length diamond-plate runways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService or storage\u003c\/strong\u003e: work beneath a raised vehicle, or park a second car underneath the first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree drip trays\u003c\/strong\u003e seat between the runways and catch fluid from the upper vehicle so it never reaches the car stored below.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJack tray\u003c\/strong\u003e accepts a bottle jack or floor jack so you can raise one end of the vehicle off the runways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster kit\u003c\/strong\u003e lets you roll the lift around the shop or garage; it is fully portable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-position automatic locking\u003c\/strong\u003e with a single-point release that lowers all four columns together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns on 110-volt power\u003c\/strong\u003e: no special wiring or 220-volt service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade-in-USA frame\u003c\/strong\u003e on a 20-plus-year proven design; standard finish is grey and black.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-usa8000-8-000-lb-service-storage-4-post-automotive-lift-power-unit.webp?v=1780055665\" alt=\"Black hydraulic power unit and electric motor mounted on a Triumph USA8000 lift column\"\u003e\u003cfigcaption\u003eThe hydraulic power unit mounts directly to the lift column.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-usa8000-8-000-lb-service-storage-4-post-automotive-lift-feature-3.webp?v=1780055665\" alt=\"Two diamond-plate approach ramps lowered to the floor at the drive-on end of the lift\"\u003e\u003cfigcaption\u003eDiamond-plate approach ramps fold down for an easy drive-on.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eThe USA8000 arrives as a complete package. The accessories other lifts sell separately are in the box:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo drive-on diamond-plate approach ramps with wheel stops\u003c\/li\u003e\n\u003cli\u003eThree drip trays\u003c\/li\u003e\n\u003cli\u003eJack tray (for a bottle or floor jack)\u003c\/li\u003e\n\u003cli\u003eCaster kit for rolling the lift\u003c\/li\u003e\n\u003cli\u003eInstallation \u0026amp; operation manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn optional \u003ca href=\"\/products\/triumph-3500-lbs-sj35-rolling-bridge-jack\"\u003eTriumph SJ-35 3,500-lb sliding jack\u003c\/a\u003e is available separately for raising a wheel or axle while the vehicle stays on the runways. The sliding jack is not made in the USA, and there is currently no US-made option for it.\u003c\/p\u003e\u003ch2\u003eCustom Colors\u003c\/h2\u003e\u003cp\u003eThe USA8000 is available in custom runway and crossrail colors at no extra charge. The columns stay grey, while the runways and crossrails can be painted in one of Triumph's available custom colors. If you want a color that is not shown, contact us before ordering and we can confirm availability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCustom color orders are non-cancelable once placed.\u003c\/li\u003e\n\u003cli\u003eProduction time is approximately 3 weeks plus freight transit.\u003c\/li\u003e\n\u003cli\u003eThe columns remain grey.\u003c\/li\u003e\n\u003cli\u003eOnly the runways and crossrails can be custom painted.\u003c\/li\u003e\n\u003cli\u003eThe drip trays remain black plastic.\u003c\/li\u003e\n\u003cli\u003eThe power unit remains black.\u003c\/li\u003e\n\u003cli\u003eThe aluminum ramps cannot be painted.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTo order a custom color, add your requested color in the order notes or contact us at \u003ca href=\"mailto:support@projectfoundry.co\"\u003esupport@projectfoundry.co\u003c\/a\u003e or \u003ca href=\"tel:+13312725655\"\u003e331-272-5655\u003c\/a\u003e before placing the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eTriumph USA8000 Specifications\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e8,000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Height\u003c\/td\u003e\n\u003ctd\u003e82\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (without approach ramps)\u003c\/td\u003e\n\u003ctd\u003e175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (with approach ramps)\u003c\/td\u003e\n\u003ctd\u003e207\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Width\u003c\/td\u003e\n\u003ctd\u003e112\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Width (with power unit)\u003c\/td\u003e\n\u003ctd\u003e124\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Height\u003c\/td\u003e\n\u003ctd\u003e73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight Under Runway\u003c\/td\u003e\n\u003ctd\u003e69\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRunway Length\u003c\/td\u003e\n\u003ctd\u003e165\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive-Thru Width\u003c\/td\u003e\n\u003ctd\u003e102.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRunway Width\u003c\/td\u003e\n\u003ctd\u003e19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBetween Runways\u003c\/td\u003e\n\u003ctd\u003e37\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLowered Height\u003c\/td\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking Positions\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Plate Size\u003c\/td\u003e\n\u003ctd\u003e12\" x 10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLock Release\u003c\/td\u003e\n\u003ctd\u003eSingle Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Time\u003c\/td\u003e\n\u003ctd\u003e40 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e110V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic Fluid\u003c\/td\u003e\n\u003ctd\u003eAW-32 or ISO-32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir Capacity\u003c\/td\u003e\n\u003ctd\u003eApprox. 12 quarts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1,600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Finish\u003c\/td\u003e\n\u003ctd\u003eGrey and black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cem\u003eFoundation: minimum 4\" of 3,500-psi steel-reinforced concrete, no more than 2 degrees of slope (per installation manual). Hydraulic fluid and reservoir capacity per installation manual.\u003c\/em\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eShipping \u0026amp; Delivery\u003c\/h2\u003e\u003cp\u003eYour lift ships on an LTL common-carrier freight truck, a 48-foot semi. Please read these delivery terms before ordering:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYou are responsible for unloading the lift from the truck; the driver does not unload it.\u003c\/li\u003e\n\u003cli\u003eLift-gate delivery is not available for auto lifts.\u003c\/li\u003e\n\u003cli\u003eA lift this heavy cannot be unloaded by hand. You need a forklift, Bobcat, tractor, tow truck, or backhoe.\u003c\/li\u003e\n\u003cli\u003eYou schedule the delivery appointment directly with the freight company.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you cannot unload at your location, the lift can ship to the carrier's nearest freight terminal for pickup with a trailer or moving van. For help choosing a delivery option, email \u003ca href=\"mailto:support@projectfoundry.co\"\u003esupport@projectfoundry.co\u003c\/a\u003e or call \u003ca href=\"tel:+13312725655\"\u003e331-272-5655\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eTriumph covers the USA8000 with a \u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e (parts only, no labor). If something fails, call us; we troubleshoot over the phone, then ship the needed part free of charge by ground service. Labor to install the replacement part is not covered. The hydraulic \u003cstrong\u003ecylinders carry a 30-day full warranty\u003c\/strong\u003e, after which a seal kit is provided. Rubber lifting pads are not covered.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan the USA8000 be used for both service and storage?\u003c\/h3\u003e\u003cp\u003eYes. Raise a vehicle to work underneath it, or park one car on the runways above a second car on the floor. The three drip trays keep fluid from the upper vehicle off the one below.\u003c\/p\u003e\u003ch3\u003eWhat does the lift need for installation?\u003c\/h3\u003e\u003cp\u003eA minimum of 4 inches of 3,500-psi steel-reinforced concrete with no more than 2 degrees of slope, plus a standard 110-volt outlet. Do not install it on asphalt or wood.\u003c\/p\u003e\u003ch3\u003eHow much overhead clearance do I need?\u003c\/h3\u003e\u003cp\u003eThe runways rise to a 73-inch lift height. Add the height of your vehicle, plus working clearance, to find the ceiling height your space needs.\u003c\/p\u003e\u003ch3\u003eCan I move the lift after it is set up?\u003c\/h3\u003e\u003cp\u003eYes. The included caster kit lets you roll the lift around the shop or garage, so it does not have to stay in one spot.\u003c\/p\u003e\u003ch3\u003eWhat hydraulic fluid does it use?\u003c\/h3\u003e\u003cp\u003eAW-32 or ISO-32 hydraulic oil; the reservoir holds about 12 quarts (per the installation manual).\u003c\/p\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cp\u003eDownload the full installation and operation manual:\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-usa8000-8-000-lb-service-storage-4-post-automotive-lift-manual.pdf?v=1780055667\" rel=\"noopener noreferrer\" aria-label=\"Triumph USA8000 installation and operation manual, PDF, opens in new tab\"\u003eTriumph USA8000 Installation \u0026amp; Operation Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Triumph","offers":[{"title":"Warehouse Pickup","offer_id":53427099926891,"sku":"USA8000","price":4599.0,"currency_code":"USD","in_stock":true},{"title":"Ship to My Address","offer_id":53427099959659,"sku":"USA8000-S","price":4799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/7028\/1067\/files\/triumph-usa8000-8-000-lb-service-storage-4-post-automotive-lift-hero.webp?v=1782424516","url":"https:\/\/projectfoundry.co\/products\/triumph-usa8000-8-000-lb-service-storage-4-post-automotive-lift","provider":"Project Foundry","version":"1.0","type":"link"}