Atlas 408SL 8,000 lb Portable 4-Post Storage Lift + FP8 8-Piece Floor Panel Combo
Atlas 408SL 8,000 lb Portable 4-Post Storage Lift + FP8 8-Piece Floor Panel Combo is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Most orders ship within 1-2 business days and arrive within 4-7 business days. Some large equipment ships via freight and may take longer, with delivery requirements communicated upfront. Most items ship free within the continental U.S.; oversized or freight items may include additional shipping charges shown at checkout. Full details are available in our Shipping Policy.
Financing Options
Financing Options
We offer financing on qualifying purchases through our checkout partners, so you can spread the cost of larger equipment over time. Options and rates vary based on your order and creditworthiness, and are shown at checkout. Need a custom quote or invoice for a bulk order? Contact us at support@projectfoundry.co.
Price Match Guarantee
Price Match Guarantee
Found the same item in stock for less at an authorized retailer? We'll match it. Just send us a link or screenshot of the competitor's price before or after your purchase, and we'll review it within 24 hours. See our full Price Match Guarantee page for eligibility details.
Atlas 408SL 8,000 lb Portable 4-Post Storage Lift + FP8 8-Piece Flo...
Questions before buying?
Description
Description
Description
The Atlas 408SL is an 8,000-lb four-post storage lift built around the same column and runway standards as the commercial Atlas 412 and 414, packaged for hobbyists and collectors who want the heavier construction in a portable footprint. Bundled with the FP8 eight-piece floor panel set, the deck above a parked vehicle becomes continuous storage space — useful for tires, boxed seasonal items, parts, or dedicated overhead storage in a tight garage.
Each column carries two special bends that increase column strength and expand the surface area the slide block travels along. Horizontal cables run hidden inside the cross tubes, and professional-grade wheel covers shield the remaining cable runs and the double-lock safety system. A single-point lock release engages all four locks from one control. The 408SL weighs over 100 lbs more than other hobbyist lifts on the same column-and-runway configuration, with the extra mass concentrated in load-bearing steel.
The included caster kit with polyurethane wheels lets you reposition the lift across the shop floor without dragging or scuffing the surface. Steel approach ramps, a steel jack tray, four plastic drip trays, and wheel stops ship in the box. The power unit can be mounted at any corner of the lift, runs on 110V with a 30-amp breaker (plug not included), and anchor bolts are optional and sold separately.
The FP8 floor panel set is an eight-piece kit — six middle sections plus two end sections — sized at 37.25" wide x 19.5" deep x 4" tall per section, with 400 lb of capacity per section. The panels close the gap between the runways for a flat, continuous storage platform.
Please note that if you order an Atlas item, your delivery location must be able to accommodate a 53' truck.
Features
408SL Lift
- 8,000 lb lifting capacity
- Free-standing, portable four-post design
- Diamond-plated steel runways
- Single-point lock release
- Columns with two special bends for added strength and increased slide-block surface area
- Larger column cross-section than standard hobbyist lifts
- Double-lock safety system
- Higher-quality powder coating in steel gray
- Horizontal cables hidden inside columns and cross tubes
- Commercial-grade wear blocks
- Power unit can be mounted at any corner
- Wider access between runways
- Caster kit with polyurethane wheels included
- Steel approach ramps included
- Steel jack tray included
- Four plastic drip trays included
- Wheel stops included
- Anchor bolts optional (sold separately)
- 110V electric operation, 30A breaker required (plug not included)
- Shipping weight: 1,965 lbs
- 2-year structural / 2-year hydraulic warranty (parts only)
FP8 Floor Panel Set
- Complete 8-piece set: 6 middle sections + 2 end sections
- 400 lb capacity per section
- Lightweight design
- Section dimensions: 37.25" wide x 19.5" deep x 4" tall
- Closes the gap between the 408SL runways for full-deck storage above a parked vehicle
Specifications
| Atlas 408SL Specifications | |
|---|---|
| Capacity | 8,000 lb |
| Lifting Height to Top of Runway | 73 1/4" (6' 1 1/4"), not on lock |
| Clearance Under Runways | 68 1/2" (5' 8 1/2") |
| Height of Columns | 83" (7' 11") |
| Overall Width (Without Motor) | 109 5/8" (9' 1 5/8") |
| Overall Width (With Motor) | 117 1/2" (9' 9 1/2") |
| Overall Length With Approach Ramp | 205 3/8" (17' 1 3/8") |
| Approach Ramp | 35" (2' 11") |
| Runway Width | 21 1/2" with rails / 18 3/4" driving surface |
| Runway Length | 166 3/4" (13' 10 3/4") |
| Runway Thickness | 4 3/4" |
| Width Between Runways | 37 1/4" (3' 1 1/4") |
| Width Between Runway Rails | 34 3/8" (2' 10 3/8") |
| Outside Runway to Outside Runway | 74 3/4" (6' 2 3/4") |
| Clearance Between Columns | 95 1/2" (7' 11 1/2") |
| Length Between Columns | 156" (13') |
| Maximum Wheel Base | 154" (12' 10") |
| Drive Thru (Outside of Tire to Outside of Tire) | 82" (6' 10") |
| Motor / Electrical | 110V, 30A breaker required |
| Shipping Weight | 1,965 lb |
| Warranty | 2-year structural / 2-year hydraulic, parts only |
| Power unit plug not included. | |
| FP8 Floor Panel Set Specifications | |
|---|---|
| Set Contents | 8 sections (6 middle + 2 end) |
| Capacity per Section | 400 lb |
| Section Dimensions | 37.25" W x 19.5" D x 4" T |
Documents
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
