Triumph NT-16 16,000 lb Two Post Auto Lift
Triumph NT-16 16,000 lb Two Post Auto Lift - Warehouse Pickup is backordered and will ship as soon as it is back in stock.
Select Your Pickup Location
Choose the warehouse you will pick up from. Enter your ZIP to find the closest one.
Select a pickup location above to continue.
Subject to availability. Call or text 331-272-5655 to confirm your item is ready before pickup.
Ships fast. Enter your ZIP for a delivery date.
Save $150 Today
Up To15% OffUp to 15% off sitewide. Get an additional $150 off any order over $3,000 with code PF150 at checkout.
Triumph NT-16 16,000 lb Two Post Auto Lift
Have Questions?
Talk to an Expert
Our U.S.-based team can help you spec the right equipment or put together a custom quote.
Description
Description
Description
The Triumph NT-16 is a 16,000-lb floor-plate two-post auto lift built for full-time shop use on full-size trucks, vans, and heavy SUVs. The columns connect at the floor with a low-profile drive-over plate, so there is no overhead bar to drop ceiling clearance, useful in shops with bays under nine feet of headroom where an overhead-bar lift would not fit.
Lifting is handled by dual hydraulic chain-assist cylinders built to ANSI standards with NOK oil seals, paired with self-lubricating UHMW polyethylene sliders and bronze bushings on the carriage. Four symmetric arms swing under the vehicle on telescoping inner and outer sections, finished with rubber lift pads and a stackable adapter set in 1.5-inch, 3-inch, and 6-inch heights for trucks and SUVs that need extra reach. A single-point safety release with dual safety design holds the lift on lock, and an electrical override automatic safety shut-off cuts power if the carriage hits an out-of-range condition.
The NT-16 lifts from a 7-inch lowered height to a maximum lifting height of 72 inches in 40 seconds, on a 220V AC single-phase circuit driving a 3 HP motor. Both ISO 9001 manufacturing and CE conformity are stated by the supplier. The lift ships freight with truck adapters and mounting hardware included; the standard 1-year parts warranty applies.
Features
- 16,000-lb lifting capacity for full-size trucks, vans, and heavy SUVs
- Floor-plate (base-plate) design, no overhead bar; suits shops with limited ceiling height
- Dual hydraulic chain-assist cylinders, built to ANSI standards with NOK oil seals
- Self-lubricating UHMW polyethylene sliders and bronze bushings on the carriage
- Symmetric four-arm configuration with telescoping inner and outer sections
- Stackable rubber-pad adapter set: 1.5-inch, 3-inch, and 6-inch extensions for SUVs and trucks
- Single-point safety release with dual safety design
- Electrical override with automatic safety shut-off
- 40-second lift time on a 220V AC, 3 HP single-phase power unit
- ISO 9001 manufacturing and CE conformity stated by Triumph
- Truck adapters and mounting hardware included at no extra charge
What's Included
- Two columns (power side and offside) with floor-plate connecting bar
- Hydraulic power unit (220V AC, 3 HP, single-phase)
- Four symmetric lifting arms with rubber lift pads
- Stackable adapter set: 1.5-inch, 3-inch, and 6-inch extensions
- Truck adapters
- Mounting hardware (anchor bolts, washers, nuts)
- Hydraulic hoses and synchronizing cables
- Product manual
Specifications
| Triumph NT-16 Specifications | |
|---|---|
| Lifting capacity | 16,000 lbs |
| Lifting height (max) | 72" |
| Lowered height | 7" |
| Lift time | 40 seconds |
| Overall height | 120" |
| Overall width | 142" |
| Distance between posts | 114" |
| Drive-through width | 100" |
| Arm reach (min-max) | 32" - 49.25" |
| Base plate size | 20" × 20" |
| Power supply | 220V AC, 3 HP, single-phase |
| Arm configuration | Symmetric |
| Truck adapters | Included |
| Mounting hardware | Included |
| Shipping weight | 2,000 lbs |
| Certifications | ISO 9001, CE |
| Concrete requirement | 3,000 PSI minimum, 6" minimum thickness |
| Installs on a level, cured concrete floor that meets the spec above. Confirm your electrical service (220V AC single-phase, 30-amp breaker, 10-gauge wire minimum) before purchase. | |
Warranty
The Triumph NT-16 ships with a 1-year parts warranty. Defective parts are replaced within the warranty period; labor, freight, and consumables are not covered. Contact support@projectfoundry.co or call 331-272-5655 to start a warranty claim.
FAQ
Will the NT-16 fit in a shop with a low ceiling?
The lift itself measures 120 inches (10 feet) at its overall height, and the floor-plate design has no overhead bar above the columns. The ceiling needs to clear the columns plus the height of the tallest vehicle being raised to the working position, plan ceiling height accordingly.
Symmetric or asymmetric arms?
Symmetric. All four arms are the same length, and the columns face each other directly. This puts the vehicle centered between the columns rather than offset toward the driver-side door, which is the asymmetric pattern.
What electrical service is required?
The 3 HP power unit runs on 220V AC, single-phase. The manual lists a 30-amp breaker and minimum 10-gauge wire as the recommended electrical service. Confirm your shop has a dedicated 220V single-phase circuit available before ordering.
Is professional installation required?
Triumph provides the mounting hardware and a product manual covering layout, anchor-bolt installation, hydraulic hook-up, cable adjustment, and test run. Many shop owners install in-house with a helper; installation by a third-party contractor is also common. Project Foundry does not include installation in the base price.
How is the lift delivered?
The NT-16 ships freight on an LTL common carrier on a 48-foot semi truck. You are responsible for unloading the lift from the truck, the driver will not unload it for you, and lift-gate service is not available for auto lifts. Plan for a forklift, Bobcat, tractor, tow truck, or backhoe at the receiving location. If you cannot unload at your location, Project Foundry can ship to the carrier's nearest freight terminal for pickup with a trailer or moving van. You are responsible for scheduling the delivery appointment with the freight company.
Documents
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Why Buy From Project Foundry?
Pro-grade equipment, real support, and a buying experience built around big-ticket gear. Here's exactly what you get with every order.
Hassle-Free Freight Delivery
Most equipment ships by freight on a pallet. Here's what to expect: orders process in 1 to 2 business days, with typical transit of 4 to 7 business days. The carrier calls ahead to schedule a curbside delivery appointment, so keep a good phone number on your order. Liftgate service is included on many items. Large equipment like car lifts and attachments are too big for a liftgate and need a forklift or similar to unload. No equipment on site? You've got options: have it delivered somewhere that does, like a neighbor's place or your workplace, or have it sent to a local freight terminal such as Estes or Old Dominion, where you can pick it up with a trailer and their forklift loads it for you. Contact us to arrange terminal pickup. Inspect before you sign: note any damage on the delivery receipt before signing, and for concealed damage, send us photos within 48 hours to protect your replacement coverage. Questions about delivery to your address? Call or text 331-272-5655. Full details are on our Shipping Policy.
Lowest Prices Online
We keep every price at the lowest point the manufacturer allows, so you're always starting from the best price we're permitted to advertise. Want to do better than that? We offer additional discounts for new customers, holidays, veterans, healthcare workers, and more. Call 331-272-5655 for exclusive pricing. Paying by wire, ACH, or check? Take an extra 3% off, since we skip the credit card processing fee and pass that savings straight to you.
Found it cheaper from another authorized dealer? Tell us. We'll verify they're a legitimate dealer and do our best to match or beat the price. We don't match eBay or marketplace listings. Reach us at 331-272-5655 before you order. Full terms are on our Price Match Guarantee page.
Free Warehouse Pickup
Many items are available for free pickup at our supplier warehouses, so you can skip freight charges entirely. Availability depends on the product and brand. Once your order is ready, we'll send written authorization with the location and pickup instructions, so please wait for that confirmation before heading out. Plan to pick up within 48 to 72 hours of the ready notice. Want to know if your item qualifies? Call or text 331-272-5655.
Authorized Dealer, Full Factory Warranty
We're an authorized dealer for every brand we carry. That means factory-fresh equipment with the full manufacturer warranty, never gray-market product from a random marketplace seller. If you ever need a warranty claim, we help you through it.
Heads up: the equipment world has its share of fake websites and unauthorized sellers pushing prices that are too good to be true. If you're ever unsure about a seller, reach out. We'll help you spot the red flags, even if you don't end up buying from us.
Flexible Monthly Financing
Spread the cost out with Shop Pay Installments. Break a big purchase into manageable monthly payments and get your equipment now instead of saving up for it. Select Shop Pay at checkout to see your options.
