Triumph NTR-24 24,000 lb 4 Post Auto Lift + 2 RJ-15 Rolling Bridge Jacks Combo
Triumph NTR-24 24,000 lb 4 Post Auto Lift + 2 RJ-15 Rolling Bridge Jacks Combo - Warehouse Pickup is backordered and will ship as soon as it is back in stock.
Select Your Pickup Location
Choose the warehouse you will pick up from. Enter your ZIP to find the closest one.
Select a pickup location above to continue.
Subject to availability. Call or text 331-272-5655 to confirm your item is ready before pickup.
Ships fast. Enter your ZIP for a delivery date.
Save $150 Today
Up To15% OffUp to 15% off sitewide. Get an additional $150 off any order over $3,000 with code PF150 at checkout.
Triumph NTR-24 24,000 lb 4 Post Auto Lift + 2 RJ-15 Rolling Bridge ...
Have Questions?
Talk to an Expert
Our U.S.-based team can help you spec the right equipment or put together a custom quote.
Description
Description
Description
The Triumph NTR-24 is a 24,000-lb four-post auto lift sized for commercial trucks, fleet vans, ambulances, and box trucks, the work-mix that demands more capacity than a passenger-car lift can give. This combo pairs the NTR-24 with two RJ-15 rolling bridge jacks (15,000-lb each), letting a single technician lift a wheel-end for brake, tire, suspension, or driveline work without dismounting the vehicle from the runways.
The NTR-24 runs on 220V single-phase service (no three-phase install), reaches a maximum lifting height of 70.8 inches, and locks into nine mechanical positions across that range. A 9-inch minimum runway height keeps the lowered profile short enough to drive over without ramps catching on low-hanging exhaust or air dam. The runways are 24 inches wide and 289.9 inches long, with adjustable between-runway spacing from 45.3" to 49.2", wide enough for full-size duallys and dual-rear-wheel work trucks, narrow enough to land a Sprinter or box-truck wheelbase squarely.
The combo's two RJ-15 rolling bridge jacks each ship with two height adapters (5-inch and 6.75-inch) and lift to 28.3 inches with a 15.3-inch lowered height. Each jack rides the channel between the lift's runways and accommodates between-runway widths from 48.7" to 55". With both jacks aboard, a tech can pick up either axle independently, useful for axle-out service or front-end work where the wheels need to come off the runways.
The lift ships on a 48-foot LTL semi. Delivery requires equipment on your end to remove the lift from the truck. A fork lift, Bobcat, tractor, tow truck, or back hoe will all handle the 6,614-lb shipping weight. Liftgate service is not available on this freight class. See the Freight & Delivery section below for the full receiving checklist.
Features
NTR-24 four-post lift
- 24,000-lb lifting capacity, sized for commercial trucks, vans, and fleet vehicles
- 9 mechanical lock positions across a 70.8-inch lifting range
- 9-inch minimum runway height for low-clearance drive-on
- 24-inch runway width with adjustable 45.3"-49.2" between-runway spacing
- 131.8 inches between columns, clears full-size truck doors with room to work
- 220V single-phase electrical; no three-phase service required
- Heavy-duty steel column and beam construction
RJ-15 rolling bridge jack (two included)
- 15,000-lb lifting capacity per jack
- Two height adapters per jack (5-inch and 6.75-inch) for varying vehicle profiles
- 15.3-inch lowered height, 28.3-inch maximum lifting height
- Pad spread adjusts from 42.6" to 68.7" to fit common axle and frame-rail widths
- Rides the NTR-24's between-runway channels, slides front-to-back along the lift
What's Included
- One Triumph NTR-24 24,000-lb four-post auto lift
- Two Triumph RJ-15 15,000-lb rolling bridge jacks
- Two height adapters per jack (5-inch and 6.75-inch)
- Approach ramps (NTR-24)
Specifications
| Triumph NTR-24 24,000 lb 4 Post Auto Lift | |
|---|---|
| Capacity | 24,000 lbs |
| Maximum lifting height | 70.8" |
| Minimum runway height | 9" |
| Overall height | 93.1" |
| Overall length (without approach ramps) | 300" |
| Overall length (with approach ramps) | 338.9" |
| Overall width | 150.1" |
| Runway length | 289.9" |
| Runway width | 24" |
| Width between runways | 45.3"-49.2" |
| Width between columns | 131.8" |
| Lock positions | 9 |
| Electrical requirement | 220V single phase |
| Shipping weight | 6,614 lbs |
| Shipping dimensions | 295 × 30 × 43 in |
| Triumph RJ-15 15,000 lb Rolling Bridge Jack (qty 2) | |
|---|---|
| Capacity (per jack) | 15,000 lbs |
| Lowered height | 15.3" |
| Maximum lifting height | 28.3" |
| Minimum width between pads | 42.6" |
| Maximum width between pads | 68.7" |
| Minimum width between runways | 48.7" |
| Maximum width between runways | 55" |
| Height adapters included | 5" and 6.75" (per jack) |
| Shipping weight (per jack) | 661 lbs |
| Shipping dimensions (per jack) | 51 × 33 × 17 in |
Compatibility
The RJ-15 jack requires a between-runway width of at least 48.7" and accommodates up to 55". The NTR-24's between-runway adjustment range is 45.3"-49.2". Set the NTR-24 to 48.7" or wider any time the rolling bridge jacks are mounted. Use the narrower 45.3"-48.6" range only when the rolling jacks are off the lift.
Each RJ-15 lifts up to 15,000 lb, well within the per-axle weight of vehicles the NTR-24 is sized for. The two-jack combo lets a single technician service both ends of a heavy work truck without dismounting from the runways.
Warranty
Triumph covers the NTR-24 with a 1-year parts warranty. Diagnosis happens over the phone. Call us, we troubleshoot the symptom with you, and we ship the failed part to your address. The part is free and ground shipping is free.
Hydraulic cylinders carry a 30-day full warranty. After 30 days, cylinder coverage is a free seal kit. Labor is not covered; a local mechanic can install the replacement part, or you can do it yourself. Most Triumph parts swaps are mechanic-friendly.
Rubber lifting pads are wear items and are not covered under warranty.
Freight & Delivery
The NTR-24 ships on an LTL common-carrier freight company on a 48-foot semi. Before ordering, plan for the following on your end:
- You unload the lift from the truck. The driver does not unload it for you.
- Liftgate service is not available on this freight class.
- You need machinery rated for the full shipping weight (6,614 lb). A fork lift, Bobcat, tractor, tow truck, or back hoe will all do the job.
- If you don't have unloading equipment at your address, we can ship to the carrier's nearest freight terminal for pickup with a trailer or moving van.
- You schedule the delivery appointment with the freight company once the shipment is in your area. We don't have your schedule, so we can't make that call for you.
FAQ
What vehicles is the NTR-24 sized for?
The 24,000-lb capacity targets commercial trucks, full-size vans, ambulances, fleet pickups, and box trucks. Use the runway width, between-runway adjustment, and column spacing in the Specifications table to confirm the wheelbase and overall width fit before ordering.
Will the RJ-15 jacks fit when I set the NTR-24's runways narrower?
The RJ-15 requires a minimum 48.7" between runways. The NTR-24's narrowest setting (45.3") is below that. Set the lift to 48.7" or wider any time the rolling bridge jacks are mounted. See the Compatibility section above.
Does the NTR-24 need three-phase power?
No. The lift runs on 220V single-phase service.
Is installation included?
Installation is not included with the combo. The lift ships freight; install is the buyer's responsibility or a separate arrangement with a local installer.
Does the warranty cover labor?
No. The warranty covers parts and ground shipping only. Triumph diagnoses the failure over the phone and ships the replacement part free. Labor for installing the part is the buyer's responsibility.
Can both rolling jacks be on the lift at the same time?
Yes. The combo includes two RJ-15 jacks, and the NTR-24's between-runway channels accommodate both jacks. Slide each jack to the axle being serviced.
Documents
Manual and technical documents available on request. Contact support@projectfoundry.co or call 331-272-5655.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Why Buy From Project Foundry?
Pro-grade equipment, real support, and a buying experience built around big-ticket gear. Here's exactly what you get with every order.
Hassle-Free Freight Delivery
Most equipment ships by freight on a pallet. Here's what to expect: orders process in 1 to 2 business days, with typical transit of 4 to 7 business days. The carrier calls ahead to schedule a curbside delivery appointment, so keep a good phone number on your order. Liftgate service is included on many items. Large equipment like car lifts and attachments are too big for a liftgate and need a forklift or similar to unload. No equipment on site? You've got options: have it delivered somewhere that does, like a neighbor's place or your workplace, or have it sent to a local freight terminal such as Estes or Old Dominion, where you can pick it up with a trailer and their forklift loads it for you. Contact us to arrange terminal pickup. Inspect before you sign: note any damage on the delivery receipt before signing, and for concealed damage, send us photos within 48 hours to protect your replacement coverage. Questions about delivery to your address? Call or text 331-272-5655. Full details are on our Shipping Policy.
Lowest Prices Online
We keep every price at the lowest point the manufacturer allows, so you're always starting from the best price we're permitted to advertise. Want to do better than that? We offer additional discounts for new customers, holidays, veterans, healthcare workers, and more. Call 331-272-5655 for exclusive pricing. Paying by wire, ACH, or check? Take an extra 3% off, since we skip the credit card processing fee and pass that savings straight to you.
Found it cheaper from another authorized dealer? Tell us. We'll verify they're a legitimate dealer and do our best to match or beat the price. We don't match eBay or marketplace listings. Reach us at 331-272-5655 before you order. Full terms are on our Price Match Guarantee page.
Free Warehouse Pickup
Many items are available for free pickup at our supplier warehouses, so you can skip freight charges entirely. Availability depends on the product and brand. Once your order is ready, we'll send written authorization with the location and pickup instructions, so please wait for that confirmation before heading out. Plan to pick up within 48 to 72 hours of the ready notice. Want to know if your item qualifies? Call or text 331-272-5655.
Authorized Dealer, Full Factory Warranty
We're an authorized dealer for every brand we carry. That means factory-fresh equipment with the full manufacturer warranty, never gray-market product from a random marketplace seller. If you ever need a warranty claim, we help you through it.
Heads up: the equipment world has its share of fake websites and unauthorized sellers pushing prices that are too good to be true. If you're ever unsure about a seller, reach out. We'll help you spot the red flags, even if you don't end up buying from us.
Flexible Monthly Financing
Spread the cost out with Shop Pay Installments. Break a big purchase into manageable monthly payments and get your equipment now instead of saving up for it. Select Shop Pay at checkout to see your options.
