2,350 PSI 1.8 GPM Cold Water Corded Electric Pressure Washer with 4-Wheel 360° Steering - P2318EN

Professional Grade Cleaning in a Compact Four-Wheel Electric Package

The BE Power Equipment P2318EN 2,350 PSI 1.8 GPM Electric Pressure Washer is built to deliver serious cleaning power in a compact, highly maneuverable electric package. What sets this model apart from every other electric pressure washer in the BE Workshop range is its 4-wheel 360° steering system — four lockable swivel wheels on a compact square chassis that allow you to roll, pivot, and position the unit in any direction without lifting or dragging. The low center of gravity design eliminates the tipping risk common in taller two-wheel units.

Powered by a BE 1.6 HP electric motor and paired with a maintenance-free BE axial pump, the P2318EN delivers 2,350 PSI at 1.8 GPM for effective cleaning of driveways, vehicles, siding, patios, and outdoor equipment. Whether you're cleaning around the house or maintaining outdoor equipment, this unit delivers dependable performance without the noise, fumes, or maintenance of gas-powered equipment.

Key Features

• Pressure Rating: 2,350 PSI
• Flow Rate: 1.8 GPM for consistent cleaning power
• Motor: BE 1.6 HP / 13 Amp / 120V induction electric motor with Total Stop System
• Pump: BE axial pump at 3,450 RPM — sealed crankcase, no oil changes required
• Mobility: 4 lockable swivel wheels with 360° steering and compact square chassis for maximum maneuverability
• Nozzles Included: 15° high-pressure nozzle, 40° wide-angle nozzle, and high-pressure foam cannon
• Power Cord: 35 ft. with GFCI plug for electrical safety
• Hose: 20 ft. x 1/4" PVC hose with M22 connection
• Accessories: Split lance trigger gun and spray wand with integrated hose and wand storage

Four-Wheel 360° Steering — A Different Kind of Mobility

The P2318EN is built on a compact square chassis with four lockable swivel wheels that provide full 360° steering capability. Unlike traditional two-wheel hand-truck style pressure washers that must be tilted and dragged to change direction, the P2318EN rolls smoothly in any direction with minimal effort. The low profile design reduces the center of gravity, eliminating the tipping risk that affects taller upright models.

The lockable swivel wheels keep the unit stable during operation, then unlock instantly when you're ready to reposition. This makes the P2318EN particularly well suited for cleaning around vehicles, navigating tight spaces, and working on irregular terrain where a two-wheel unit would be cumbersome.

BE Electric Motor with Total Stop System

At the core of the P2318EN is a BE 1.6 HP / 13 Amp induction electric motor equipped with a Total Stop System. The Total Stop System automatically shuts off the motor and pump when the trigger is released, reducing wear, lowering heat buildup, conserving energy, and extending pump service life.

Motor features include:

• Smooth and quiet operation
• Total Stop System — motor shuts off automatically when trigger is released
• Reliable power for everyday residential cleaning
• No gas, no oil, no pull-start cords

BE Maintenance-Free Axial Pump

Paired with the electric motor is a maintenance-free BE axial pump running at 3,450 RPM. The sealed crankcase design requires no oil changes or complex upkeep, delivering consistent pressure and flow every time. A thermal relief valve protects the pump during extended operation, releasing heat if the unit is left running with the trigger closed.

Three-Nozzle Set for Versatile Cleaning

The P2318EN includes three quick-connect nozzles covering the core residential cleaning applications:

• 15° Nozzle: High-intensity spray for tough stains on concrete, driveways, and hard surfaces
• 40° Nozzle: Wide-angle rinse for vehicles, delicate surfaces, and general rinsing tasks
• High-Pressure Foam Cannon: Applies detergent evenly for vehicle washing, siding, and surface preparation before rinsing

Quick-connect fittings allow fast, tool-free nozzle changes. Always select the appropriate nozzle for the surface being cleaned to avoid damage.

Safety Built In

The P2318EN includes a GFCI (Ground Fault Circuit Interrupter) plug on the 35 ft. power cord to protect against electrical hazards when working in wet outdoor environments. The GFCI cuts power immediately in the event of a ground fault, significantly reducing the risk of electric shock.

Compact Design and Practical Storage

At just 40 lbs and measuring 17" x 17" x 25", the P2318EN has a compact square footprint that stores easily in garages, sheds, or utility spaces. Integrated hose and wand holders keep accessories organized and immediately accessible. The 20 ft. hose provides practical reach for most residential cleaning tasks without the bulk of longer hoses.

Common Cleaning Applications

• Driveways, walkways, and patios
• Vehicles, cars, trucks, and recreational equipment
• Home siding, fences, and exterior surfaces
• Outdoor furniture and equipment
• Garage floors and small shop areas

Warranty and Factory Testing

The P2318EN is backed by a 1-year limited warranty from BE Power Equipment. Register your product to extend coverage to a 5-year registered warranty.

Each unit is functionally tested at the factory before shipping. Your pressure washer may arrive with minimal residual water or odor, which confirms the unit has passed quality testing and is ready for use.

Product Specifications

• Pressure: 2,350 PSI
• Flow Rate: 1.8 GPM
• Motor: BE 1.6 HP / 1 Phase / 13 Amp Electric Motor
• Pump: BE Axial, P1 Class, Built-In Unloader, Sealed Crankcase
• RPM: 3,450
• Total Stop System: Yes — automatically shuts off when trigger is released
• Thermal Relief Valve: Yes
• Mobility: 4 Lockable Swivel Wheels with 360° Steering
• Voltage: 120V
• Cord Length: 35 ft. with GFCI Plug
• Hose: 20' x 1/4" PVC Hose with M22 Connection
• Series: Workshop
• Unit Weight: 40 lbs / 18.1 kg
• Unit Dimensions: 17.0" x 17.0" x 25.0"
• Safety Features: Total Stop System, GFCI plug, thermal relief valve
• Warranty: 1-year limited / 5-year registered

Included in the Box

• 20' x 1/4" PVC Hose with M22 Connection
• Split Lance Trigger Gun and Wand
• 15° QC High-Pressure Nozzle
• 40° QC Wide-Angle Nozzle
• High-Pressure Foam Cannon QC Nozzle

Note: Always follow the manufacturer's instructions and guidelines when using the pressure washer.

Four-Wheel Maneuverability. Reliable Electric Power.

The BE Power Equipment P2318EN delivers 2,350 PSI of residential cleaning power in a compact, stable, four-wheel package designed for maximum maneuverability. With a BE 1.6 HP electric motor, maintenance-free BE axial pump, and the only 4-wheel 360° steering system in the BE electric pressure washer range, it is the practical choice for homeowners who want to clean efficiently without lifting, tipping, or dragging their pressure washer into position.

P2318EN — 2,350 PSI 1.8 GPM Cold Water Corded Electric Pressure Washer with 4-Wheel 360° Steering.